How to do equalization when a frequency-selective channel has been created using comm.RayleighChannel

28 次查看（过去 30 天）
Imran Tasadduq
Imran Tasadduq 2022-2-3
回答： vidyesh 2023-12-26
In previous versions of Matlab, one could simulate a frequency-selective fading channel using the following function:
chan = rayleighchan(Ts, fD, tau, Pdb).
To do equalization, the “H” vector could be determined by,
H = fft(chan.PathGains, length(txSignal))
where “txSignal” is the transmitted signal. Note that H is a one-dimensional matrix. This H vector could then be used to do equalizations such as ZF, MMSE etc. For example,
rxSignalEq = rxSignal*conj(H)./abs(H).^2;
where rxSignal is the received signal that becomes rxSignalEq after equalization.
In new versions of Matlab, rayleighchan has been replaced by comm.RayleighChannel. Now the H matrix is to be determined using,
chan = comm.RayleighChannel;
[chanOut, PathGains] = chan(txSignal);
The variable “PathGains” can now be used to find H but for frequency-selective channels, it is no more a vector, it is a matrix having number of rows equal to the number of samples in “txSignal” and the number of columns equal to the number of paths of the frequency-selective channel. Here is my question:
Since the PathGains is now a matrix rather than a vector, how can I use it to do equalizations such as, ZF, MMSE etc.?
While replying to a Matlab user, the Matlab staffer Yue Shang gave his thoughts for a flat fading channel (please refer, https://www.mathworks.com/matlabcentral/answers/373031-how-can-i-simulate-ofdm-with-rayleigh-fading-by-using-communications-system-toolbox). To do this for frequency-selective channel, he referred the readers to go over Indoor MIMO-OFDM Communication Link using Ray Tracing example and in particular the helperIndoorRayTracingRxProcessing function. However, this example is not clear and it is not based upon comm.RayleighChannel. Moreover, it is specific to MIMO-OFDM. What if we are working on a system which is neither MIMO nor OFDM?

请先登录，再回答此问题。

回答（1 个）

vidyesh
vidyesh 2023-12-26
Hello Imran,
It seems you are interested in performing equalization using the "PathGains" matrix obtained from the ‘chan(txSignal)’ operation.
The "PathGains" matrix is an output that represents the path gains of the channel. It is organized as a matrix with dimensions [Ns, Np], where Ns denotes the number of samples and Np is the number of discrete delay paths.
However, for equalization purposes, you may find it more convenient to work with the "AveragePathGains" property of the channel object. This property provides a vector containing the average gain for each of the discrete delay paths. If ‘chan’ is an instance of the ‘comm.RayleighChannel’ object, you can access this property as follows:
avgPathGains = chan.AveragePathGains;
For further information on the properties and their applications, I recommend reviewing the MATLAB documentation page dedicated to the `comm.RayleighChannel`:
https://www.mathworks.com/help/comm/ref/comm.rayleighchannel-system-object.html
Hope this answer helps

类别

在 Help Center 和 File Exchange 中查找有关 Propagation and Channel Models 的更多信息

标签

产品


版本

R2021b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by