Finding Frictional Pressure Drop in a Gas system through Simscape object Pipe(G)

Question

ABHISHEK S CHAUDHARY 2022-2-11

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1647820-finding-frictional-pressure-drop-in-a-gas-system-through-simscape-object-pipe-g

评论： Bhavana Ravirala 2022-2-17

I aim to find out the pressure drop in a gas flow due to friction through the Pipe (G) object. I have given the following Parameters for the Pipe(G) object:

Length = 50 m

Cross-sectional Area = 10 m^2

Hydraulic Dia = 3 m

I have connected the Temperature and Pressure Sensor (G) but it is simply displaying a result equal to the Pressure difference between the two reservoir. Which isn't I require. Please provide a suitable solution.

Thank you very much in advance!

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Bhavana Ravirala 2022-2-14

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1647820-finding-frictional-pressure-drop-in-a-gas-system-through-simscape-object-pipe-g#answer_895570

Hi Abhishek,

From my understanding, you are trying to find the pressure difference caused by pipe due to friction.

This is an expected behaviour. The pressure of the gas entering and leaving the reservoir will be same. So, the Temperature and Pressure sensor will sense the pressure difference between the reservoirs as output.

For more information refer the documentation below:

https://in.mathworks.com/help/physmod/simscape/ref/reservoirg.html#:~:text=Gas%20enters%20and%20leaves%20the%20reservoir%20at%20the%20reservoir%20pressure

Hope this helps.

2 个评论
显示无隐藏无

ABHISHEK S CHAUDHARY 2022-2-16

Thank you for your reply!

Could you like please tell me the appropriate method to achieve the desired object to find out the pressure drop due to friction in pipe?

Thank you!

Bhavana Ravirala 2022-2-17

The mass flow rate plays a major role in causing pressure difference due to friction in pipe.

Although the other parameters can be changed in pipe but for mass flow rate, we need to add Mass Flow Rate (G) block. For more information, please refer to the links below:

Hope this helps!

请先登录，再进行评论。