Contact force between bodies - simulink
2 次查看(过去 30 天)
显示 更早的评论
Hello everyone,
I imported a model from SOLIDWORKS to SIMULINK.
The model contains - link, gripper, surface, cube.
The goal - that the link with the gripper will hold the cube and move it to another position on the surface.
The problem is that the gripper "crushes" the cube.
How can I move the cube well? I would love an explanation
Thank you
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/900970/image.png)
回答(1 个)
Esha Chakraborty
2022-2-24
Hi Yovel,
I understand that you have modelled a robotic arm and you want to establish a 'pick and place' operation using it but the gripper is colliding with the target object.
From the initial analysis, it is understood that the joint torque required to hold the robot at a specific configuration is not able to compensate the gravity. As a result, it is falling over the object and crushing it. You can implement the 'Gravity Torque' block from the Robotic Systems Toolbox and specify the Robot Configuration in its input. This will generate the joint torque values for every joint as the ouput, required to compensate the gravity.
You can further implement these joint torque values in a Forward Dynamics block to establish the correct motion in the robotic arm.
0 个评论
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Multibody Dynamics 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!