Signal generation on Simulink?

Question

Hossam Amin 2022-2-21

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1655375-signal-generation-on-simulink

评论： Hossam Amin 2022-2-22

I would like to know how can I generate a signal that looks like this (in the image) mainly using Simulink or a script function that can be employed later in simulink.

Thanks

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Arif Hoq 2022-2-22

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1655375-signal-generation-on-simulink#answer_901590

在 MATLAB Online 中打开

You can use this script in a function block of Simulink. Just take y as a output in the simulink block.

fs = 9000; % signal sampled at a rate of 200 Hz for 1 second

t = 0:1/fs:1;

y1 = cos(2*pi*30*t);

y2 = cos(2*pi*5*t); % 5 Hz modulating signal

y2 = rescale(y2,0.15,1); % modulation amplitude min/max factor

y = y1 .* y2; % create amplitude-modulated signal

plot(y(1:7000))

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

Answer 2

Sulaymon Eshkabilov 2022-2-22

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1655375-signal-generation-on-simulink#answer_901605

在 MATLAB Online 中打开

Modulation_Signal_Generation.slx

This modulation signal can be generated using the following Simulink model and/or this M-ffile:

fs = 5000; % sampling frequency (Hz)

t = 0:1/fs:1; % time vector

x = (1.25+sin(2*pi*25*t+pi/2)).*sin(2*pi*t*175);

plot(t,x), grid on

xlim([0, 0.25])

xlabel('Time, [sec]')

ylabel('Amplitude')

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Hossam Amin 2022-2-22

Thanks for the answer.

I was thinking if I needed to add some random guassian noise to that signal and then consider the whole signal as semi-symmetric, subtract each data point with it's symmetric counter part. i.e in that case the midpoint is 0.125. So subtract point at 0.125s from point at 0s, point 0.2 from 0.05 and so on.

Hence, in this perfect signal such subtraction is equal to zero, however, when random noise is added to it, the subtraction will not be zero I believe.

请先登录，再进行评论。