License manager error -15

93 次查看（过去 30 天）
Pancham Shukla
Pancham Shukla 2022-3-5
评论： LABS DTEC 2024-10-18
I am using AppsAnywhere to launch Matlab through my University system. It gives me License manager error -15.
Unfortunatley, I removed the directory where Matlab was prevsiouly installed. I don't know what to do.

请先登录，再回答此问题。

回答（2 个）

Srijith Kasaragod
Hi,
This error can have different meanings depending on which system it occurs.
If you receive this error on a client installation of MATLAB:
  1. Verify communication by pinging the license manager server from the client with the following command: ping <hostname> where <hostname> is the hostname of the server machine. If this fails you may have a networking error that is preventing the client from communicating with the license manager server. Contact your network administrator to resolve this issue. NOTE: If you know the IP address of the server and are able to ping that, the issue more lies within the DNS configuration of your network. You can replace the hostname in the server line of the network.lic with the IP address as a workaround
  2. Verify that the SERVER line of the network.lic on the client matches that of the license.dat file on the server itself. If the SERVER line differs it may cause the client to contact the wrong server/port.
  3. Check if there is a firewall(s) between the MATLAB client and the license manager server. The license manager communicates on two ports that must be opened through the firewall(s). These ports are specified in the license file hosted on the license manager server. If there is a firewall running, contact your System Administrator to open the necessary ports in the firewall.
If you receive this error on the license server:
  1. Verify that the license manager is running on the license server. If the license manager is not running, restart the license manager and try to run MATLAB again. This will often resolve the error. For more information on how to restart the license manager, see instructions: https://www.mathworks.com/matlabcentral/answers/102968-how-do-i-start-or-stop-the-network-license-manager
  2. Verify that the TCP port numbers used by the license manager are not already being used by another application. To determine which port numbers the license manager is using, refer to the end of the SERVER and/or DAEMON lines in the license.dat file.
Note that the license manager uses two ports. The first port is used by lmgrd, and is defined at the end of the SERVER line in the license.dat file. By default, port 27000 is used. The second port is used by MLM, and is (optionally) defined at the end of the DAEMON line in the license.dat file. By default, the port is randomly selected.
If the DAEMON line does not end with "port=<number>", then MLM is using a random open port. Consult your network administrator for help identifying ports in use.
For more information about these ports, see the article below:
What ports does the MATLAB license manager use, and how can I set those ports?
If you are getting this error while connected to a Wide Area Network (WAN), please see the article below:
Why do I receive a license manager error -15 when trying to checkout a license key from a distant location or over a wide area network (WAN)?
Hope this helps!
LABS DTEC
LABS DTEC 2024-5-2
编辑：LABS DTEC 2024-5-2
Unfortunately I can't solve it by following these steps.
  2 个评论
Jaroslaw
Jaroslaw 2024-10-17
hi LABS DTEC
were you abled to solve this? we have the exact same error but are abled to ping the server.
LABS DTEC
LABS DTEC 2024-10-18
Hello Jaroslaw,
We address this issue by setting a specific port number for the Vendor Daemon software (MLM.exe).
For Windows OS:
1) on the PC where the license manager was installed, go to the path C:\Program Files\MATLAB\R2021b\etc
2) open the <license.dat> file as administrator and set a port number between 27001 and 27009. In our case, we chose 27001, as shown below:
  • MLM DAEMON "C:\Program Files\MATLAB\R2021b\etc\win64\mlm.exe" port=27001
3) Save the changes and ensure that the PC's firewall has a valid rule to allow communication through the port defined above. If not, you need to set this rule.

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Manage Products 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by