need help for adding a error bar

2 次查看（过去 30 天）
surawut.A
surawut.A 2022-4-7
评论： Dave B 2022-4-7
%------------------------------------------------------
M = [15, 0.765891, 30, 0.466818, 45, 0.770541
15, 0.3472, 30, 0.233845234, 45, 0.15337401
15, 0.15, 30, 0.261, 45, 0.344
15, 0.161, 30, 0.42, 45, 0.724];
b = bar(M(:,[2 4 6])');
set(gca, 'XTickLabel', string(M(1,[1 3 5])));
xlabel('%Carbon monoxide content');
ylabel('Mass gain (μg/mm^2)');
legend({['900' char(176) 'C'], ['800' char(176) 'C'], ['700' char(176) 'C'], ['600' char(176) 'C']});
%------------------------------------------------------
% add error bars
%
%------------------------------------------------------
hold on;
xx = [b(1).XEndPoints; b(2).XEndPoints; b(3).XEndPoints; b(4).XEndPoints];
yy = [b(1).YData; b(2).YData; b(3).YData; b(4).YData];
yneg = [0.51560 0.25806 0.12860 0.12847 0.28987 0.16209 0.12867 0.12913 0.29282 0.12890 0.12853 0.12920];%%%%%%%%%%
ypos = [0.77200 0.38820 0.19300 0.22494 0.61180 0.32200 0.20403 0.33897 0.55095 0.22610 0.19350 0.35329];%%%%%%%%%%
eb = errorbar(xx,yy,yneg,ypos'o', 'linestyle', 'none', 'color', 'k', 'linewidth', .8);
set(eb, 'HandleVisibility', 'off');
I would like to add a error bar to my graph. If you run a bar code you will get a 12 bar with 4 temperature and 3 different %carbon content,
I have a number from calulation on yneg (ErrorMin) ypos (ErrorMax),
I arange like first number from neg and pos are for first bar and continue.
and if you know how to do a pattern fill on a bar like a pircture below please help

请先登录，再回答此问题。

采纳的回答

Dave B
Dave B 2022-4-7
Ran in:
I think the problem you ran into was that you were calling errorbar with 4x4 matrices for x and y, and 1x12 vectors for yneg and ypos. If you provide vectors for x and y things will work well, and it's easy to convert your matrices to vectors with (:) - just make sure that the values match up as you expect (i.e. that you don't need a transpose).
In the snippet below the only line of code I adjusted was the call to errorbar, where I inserted (:) after xx and yy (and a missing comma before 'o'
clf
M = [15, 0.765891, 30, 0.466818, 45, 0.770541
15, 0.3472, 30, 0.233845234, 45, 0.15337401
15, 0.15, 30, 0.261, 45, 0.344
15, 0.161, 30, 0.42, 45, 0.724];
b = bar(M(:,[2 4 6])');
set(gca, 'XTickLabel', string(M(1,[1 3 5])));
xlabel('%Carbon monoxide content');
ylabel('Mass gain (μg/mm^2)');
legend({['900' char(176) 'C'], ['800' char(176) 'C'], ['700' char(176) 'C'], ['600' char(176) 'C']});
hold on;
xx = [b(1).XEndPoints; b(2).XEndPoints; b(3).XEndPoints; b(4).XEndPoints];
yy = [b(1).YData; b(2).YData; b(3).YData; b(4).YData];
yneg = [0.51560 0.25806 0.12860 0.12847 0.28987 0.16209 0.12867 0.12913 0.29282 0.12890 0.12853 0.12920];%%%%%%%%%%
ypos = [0.77200 0.38820 0.19300 0.22494 0.61180 0.32200 0.20403 0.33897 0.55095 0.22610 0.19350 0.35329];%%%%%%%%%%
eb = errorbar(xx(:),yy(:),yneg,ypos, 'o', 'linestyle', 'none', 'color', 'k', 'linewidth', .8);
set(eb, 'HandleVisibility', 'off');
  2 个评论
surawut.A
surawut.A 2022-4-7
thank you for your help
it seem like doesn't use a number that I put on neg and pos
i'm trying to do easy way x and y but don't know how to mix like at 15% have 4 bar.
so i ask for help and got this one.
Dave B
Dave B 2022-4-7
the numbers for yneg and ypos are how far up and down the errorbars go from the bars...maybe you can expand a bit on what's seems like it doesn't use the values you're specifying?

请先登录，再进行评论。

更多回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Errorbars 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by