ROS2: Unrecognized message without using it in script

Question

Andre Below 2022-4-8

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1691965-ros2-unrecognized-message-without-using-it-in-script

回答： Andre Below 2022-4-20

Hello Everyone,

i managed to import custom massages via the command ros2genmsg. But now i get allways the error, that some massage type is not recognisable by matlab. Even when i dont use any commands that need the custom commands. See code snippet:

clc
clear
topicName="/sensor_state";
matlabNode = ros2node("matlabNode");
SensorState = ros2subscriber(matlabNode,topicName);

This example gives me now the following error massage:

Error using ros.internal.getEmptyMessage>getMessageDataAndInfo
Unrecognized message type turtlebot3_msgs/SensorState. Use ros2 msg list to see available types.
Error in ros.internal.getEmptyMessage>getCachedMap (line 46)
    [structInfo.data,structInfo.info] = getMessageDataAndInfo(msg, msgInfo, rosver);
Error in ros.internal.getEmptyMessage (line 35)
    [data,info] = getCachedMap(msgMapROS2,msg,msgInfo,rosver);
Error in ros.internal.utilities.findMsgDepends (line 17)
    [msgStruct,info] = ros.internal.getEmptyMessage(msgName,rosver);
Error in ros.internal.utilities.getPathOfDependentDlls (line 14)
pkgNamesMap = ros.internal.utilities.findMsgDepends(msgType,map,rosver);
Error in ros2subscriber/createSubscriber (line 669)
            dllPaths = ros.internal.utilities.getPathOfDependentDlls(obj.MessageType,'ros2');
Error in ros2subscriber (line 330)
            createSubscriber(obj, ordinalParser.Results.node.ServerNodeHandle, ...
Error in Turtlebot3_Subscription_SensorState (line 21)
SensorState = ros2subscriber(matlabNode,topicName);

I used turtlebot3_msgs/SensorState in the past, but deleted it afterwards because it was not longer necessary in my project. Is there any kind of storage in matlab that i have to reset when i delete packages on my disc?

EDIT: I can subscribe every topic, but not /sensor_state. E.g. /rosout.. Anyone a guess what it could be?

I use Matlab 2022a and ROS Toolbox 1.5.

I would much appreciate your help.

greetings, André

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Andre Below 2022-4-20

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1691965-ros2-unrecognized-message-without-using-it-in-script#answer_946660

It works now. I just createt a new package "turtlebot3_msgs" with a folder msg. The only msg defined there is SensorState.msg.

I have SensorState now two times. turtlebot3_matlab/SensorState and turtlebot3_msgs/SensorState.

thanks for your help.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

Answer 2

Hari Krishna Kakarla 2022-4-11

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1691965-ros2-unrecognized-message-without-using-it-in-script#answer_940255

Hi Andre,

When you generate any custom messages, It registers with MATLAB Preferences. And when you want to delete your custom messages, you need to delete your generated matlab_msg_gen folder. After deleting it, Doing "clear all" in MATLAB should actually remove the messages from preferences.

Else, call this command to update your MATLAB preferences:

reg = ros.internal.CustomMessageRegistry.getInstance('ros2',true)

This will update the MATLAB preferences correctly. I hope this information is helpful.

Thanks

Hari

6 个评论
显示 4更早的评论隐藏 4更早的评论

Hari Krishna Kakarla 2022-4-14

Hi Andre,

reg = ros.internal.CustomMessageRegistry.getInstance('ros2',true) will create a registry object. If you want to see the messages in the registry:

>> reg.getMessageList

Then check this:

>> reg.getMessageInfo('turtlebot3_msgs/SensorState');

If the above command says that there is no such message type in registry, then you can confirm that your previously generated custom messages are deleted from custom message registry.

Regarding your second question, I see that your topic is still subscring to the old message. It means some ROS 2 nodes are still active in background which earlier used those old messages. Please make sure to check all the ROS 2 nodes available in network and delete them. Please make sure to close all your MATLAB sessions running and start a new MATLAB session.

Thanks

Hari

Andre Below 2022-4-19

Hello Hari,

the command reg.getMessageList shows me only the correct massages.

For the second question i looped over all DomainID`s (1 to 101) with the command curNodeList = ros2("node","list","DomainID",curDomainID); and it shows me no old nodes. when i close all programms that create nodes, all nodes are correctly gone.

i also allready reinstalled matlab2022a but nothing works.

greetins, André

请先登录，再进行评论。