How to create a double scale of units in figures?

Question

Giuseppe 2022-4-23

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1703180-how-to-create-a-double-scale-of-units-in-figures

评论： Giuseppe 2022-4-23

database.mat

Hi guys,

I try to explain well my goal: I have a figure with several curves that are in dimensionless units (both x and y values).

I want to also show the SI units (km) both for x and y axis, as depicted in red in the figure above (I voluntalry omitted the numbers but their order of magnitude is about 1e+8 km). To get the km unit is sufficient to multiply the dimensionless value for 1.5e+8.

Here is my code and the matlab file "database.mat" that stores the database containing the curves.

load database.mat
figure
% Family of 50 planar Lyapunov orbits around L1
for k1 = 1:(numel(files_L1_L2_Ly_prop))
    plot([Ly_orb_filt(1).prop(k1).orbits.x],[Ly_orb_filt(1).prop(k1).orbits.y],...
        "Color",my_green*1.1,'LineWidth',0.3); hold on
end
axis equal; grid on; box on;
% Plot L1 point
plot(L_points_data(1).x,L_points_data(1).y,'.',...
    'color',[0,0,0],'MarkerFaceColor',my_green,'MarkerSize',10);
text(L_points_data(1).x-0.00015,L_points_data(1).y-0.0008,'L_{1}');
% Family of 50 planar Lyapunov orbits around L2
for k2 = 1:(numel(files_L1_L2_Ly_prop))
    plot([Ly_orb_filt(2).prop(k2).orbits.x],[Ly_orb_filt(2).prop(k2).orbits.y],...
         "Color",my_orange*1.1,'LineWidth',0.3); hold on    
end
% Plot L2 point
plot(L_points_data(2).x,L_points_data(2).y,'.',...
    'color',[0 0 0],'MarkerFaceColor',[0 0 0],'MarkerSize',10);
text(L_points_data(2).x-0.00015,L_points_data(2).y-0.0008,...
     '$L_{2}$','Interpreter',"latex"); hold on
% Plot Earth + Moon system 
plot(AstroData.mu_SEM_sys  -1,0,'.',...
    'color',my_blue,'MarkerFaceColor',my_blue,'MarkerSize',20);
text(AstroData.mu_SEM_sys-1.00238,0-0.001,'$Earth + Moon$','Interpreter',"latex"); 
xlabel('$x$','interpreter','latex','fontsize',12);
ylabel('$y$','interpreter','latex','FontSize',12);

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

DGM 2022-4-23

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1703180-how-to-create-a-double-scale-of-units-in-figures#answer_949065

Since R2019b, you should be able to use a method similar to this example to create the secondary x and y axes:

https://www.mathworks.com/help/matlab/creating_plots/graph-with-multiple-x-axes-and-y-axes.html#mw_ca4bd216-f46d-49cd-94ed-3fe176088b04

You may need to manipulate the limits, and ticks of the new axes in order to get them to correspond appropriately to the primary axes.

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Giuseppe 2022-4-23

Thanks for you answer. I've already saw this method but in this way I would get overlapped curves, so it would be a waste of coding. Isnt' exist an easier solution to duplicate the axes and then change the scale?

请先登录，再进行评论。