Industrial communication toolbox (R2022a): function code for Modbus multiple holding registers write
显示 更早的评论
I wish to write an uint16 integer value to Fanuc CNC controller using the ModBus write function of the industrial communcation toolbox.
The FANUC controller only accepts 'multiple holding register write' (modbus function code 16).
If I run
m = modbus('tcpip', '192.168.1.10');
write(m,'holdingregs', 2, 100, 'uint16'); % other 'precision' formats, uint64, not work neither.
a communication error will occur.
Using other modbus program to issue the 'multiple register write' command work just fine.
How to force the matlab modbus write function to generate a function-code-16 write ?
采纳的回答
Sivapriya Srinivasan
2023-10-6
编辑：Sivapriya Srinivasan
2023-10-9
Hello,
I understand that you want to force the MATLAB Modbus write function to generate a function-code-16 write, you can use the following steps:
- First, make sure you have the Industrial Communication Toolbox installed in MATLAB.
- Create a Modbus object by specifying the communication type and the IP address of the FANUC controller. In this case, you are using TCP/IP, so the code would be:
m = modbus('tcpip', '192.168.1.10');
Set the 'FunctionCode' property of the Modbus object to 16, which corresponds to the "multiple holding register write" function code:
m.FunctionCode = 16;
Use the write function to send the data to the FANUC controller. Specify the register address, the value to be written, and the data type ('uint16' in this case):
write(m, 'holdingregs', 2, 100, 'uint16');
By setting the 'FunctionCode' property to 16 before calling the write function, you can force the MATLAB Modbus toolbox to generate a function-code-16 write command.
Make sure to check the documentation of the Industrial Communication Toolbox and the specific requirements of the FANUC controller to ensure proper configuration and communication.
更多回答（0 个）
类别
在 帮助中心 和 File Exchange 中查找有关 Modbus Communication 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!
Translated by 
