How to make the postions of each circle random?

Question

khalid khan 2022-5-17

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1721185-how-to-make-the-postions-of-each-circle-random

回答： Allen 2022-5-24

Hello Matlab Community,

I generated the random number of points (100 users) within 7 different circles (different radius) in square box of 1000 by 1000 meters as shown in figure. Here. the postions of clusters (circles) are fixed in each iterations as I shared in the plots for three iterations. how to make the positions of the cluster (circles) random in each iteration (for example for 10 iterations)?.

Thank You!

the code is here......

% Set the random number generator seed, for reproducibility
rng default
% Number of iterations to run the algorithm
NITER = 3;
% Number of seconds to pause after each figure
NPAUSE = 1;
% Fixed circle parameters
NCIRCLES = 7;
x0  = [100 450 500 650 900 900 800]';
y0  = [700 200 600 500 400 100 850]';
% Number of users
NUSERS = 100; % <--- Change this to 200
for ni = 1:NITER
    userCircle = randi(NCIRCLES,NUSERS,1);
    usersPerCircle = histcounts(userCircle,1:NCIRCLES+1)';
    
    circleRadius = sqrt(usersPerCircle);
    
    figure
    axis square
    set(gca,"Box","on")
    grid on;
    set(gcf, 'units','normalized','outerposition',[0 0 1 1]);
    axis([0 1000 0 1000])
    fontSize = 10;
    xlabel('Position X (1000m)', 'FontSize', fontSize);
    ylabel('Position Y (1000m)', 'FontSize', fontSize);
    title('Random Users Within Circles', 'FontSize', fontSize);
    axis([0 1000 0 1000])
    hold on
    for nc = 1:NCIRCLES
        tnc = 2*pi*rand(usersPerCircle(nc),1);
        rnc = 10*circleRadius(nc)*rand(usersPerCircle(nc),1);
        x = x0(nc) + rnc.*cos(tnc);
        y = y0(nc) + rnc.*sin(tnc);
        h = plot(x,y,".");
        set(h,'MarkerSize',8)
    end
    pause(NPAUSE)
end

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

khalid khan 2022-5-17

@the cyclist

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Mathieu NOE 2022-5-17

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1721185-how-to-make-the-postions-of-each-circle-random#answer_965690

在 MATLAB Online 中打开

hello

maybe this ? - as far as I understand you simply want to generate random center position for the circles ?

% Set the random number generator seed, for reproducibility
rng default
% Number of iterations to run the algorithm
NITER = 10;
% Number of seconds to pause after each figure
NPAUSE = 1;
% Fixed circle parameters
NCIRCLES = 7;
% x0  = [100 450 500 650 900 900 800]';
% y0  = [700 200 600 500 400 100 850]';
% Number of users
NUSERS = 100; % <--- Change this to 200
for ni = 1:NITER
    userCircle = randi(NCIRCLES,NUSERS,1);
    usersPerCircle = histcounts(userCircle,1:NCIRCLES+1)';
    
    circleRadius = sqrt(usersPerCircle);
    
    figure(ni)
    axis square
    set(gca,"Box","on")
    grid on;
    set(gcf, 'units','normalized','outerposition',[0 0 1 1]);
    axis([0 1000 0 1000])
    fontSize = 10;
    xlabel('Position X (1000m)', 'FontSize', fontSize);
    ylabel('Position Y (1000m)', 'FontSize', fontSize);
    title('Random Users Within Circles', 'FontSize', fontSize);
    axis([0 1000 0 1000])
    hold on
    
    % create random values for circles position 
    x0  = randi([100,800],NCIRCLES,1);
    y0  = randi([100,800],NCIRCLES,1);
    for nc = 1:NCIRCLES
        tnc = 2*pi*rand(usersPerCircle(nc),1);
        rnc = 10*circleRadius(nc)*rand(usersPerCircle(nc),1);
        x = x0(nc) + rnc.*cos(tnc);
        y = y0(nc) + rnc.*sin(tnc);
        h = plot(x,y,".");
        set(h,'MarkerSize',8)
    end
    pause(NPAUSE)
end

8 个评论
显示 6更早的评论隐藏 6更早的评论

Mathieu NOE 2022-5-17

在 MATLAB Online 中打开

hello again

so the next trick is that I added a while loop to get enough spacing - here the threshold is set to gap = 3 times the max radius of the data

clc
clearvars
% Set the random number generator seed, for reproducibility
rng default
% Number of iterations to run the algorithm
NITER = 10;
% Number of seconds to pause after each figure
NPAUSE = 1;
% Fixed circle parameters
NCIRCLES = 7;
% x0  = [100 450 500 650 900 900 800]';
% y0  = [700 200 600 500 400 100 850]';
% Number of users
NUSERS = 100; % <--- Change this to 200
   
for ni = 1:NITER
    k = 0;
    userCircle = randi(NCIRCLES,NUSERS,1);
    usersPerCircle = histcounts(userCircle,1:NCIRCLES+1)';
    
%     circleRadius = sqrt(usersPerCircle);
    circleRadius = 10*sqrt(usersPerCircle);
    circleRadius_max = 10*ceil(max(circleRadius*0.1)); % rounded to upper ten's 
    min_gap = 3*circleRadius_max; % min gap between groups  -  adapt factor here (min = 2)
    
    figure(ni)
    axis square
    set(gca,"Box","on")
    grid on;
    set(gcf, 'units','normalized','outerposition',[0 0 1 1]);
    axis([0 1000 0 1000])
    fontSize = 10;
    xlabel('Position X (1000m)', 'FontSize', fontSize);
    ylabel('Position Y (1000m)', 'FontSize', fontSize);
    title('Random Users Within Circles', 'FontSize', fontSize);
    axis([0 1000 0 1000])
    hold on
    
    % create random values for circles position 
    a  = randi([circleRadius_max,1000-circleRadius_max],NCIRCLES,2);
    x0 = a(:,1);
    y0 = a(:,2);
    d0 = sqrt((x0-x0').^2 + (y0-y0').^2);
    min_d0 = min(d0(d0>0));
        
    while min_d0 <= min_gap % retry with new data if condition of gap distance is not met
         a  = randi([circleRadius_max,1000-circleRadius_max],NCIRCLES,2);
         x0 = a(:,1);
         y0 = a(:,2);
        d0 = sqrt((x0-x0').^2 + (y0-y0').^2);
        min_d0 = min(d0(d0>0));
        k = k+1;
    end
    k % shows iterations amount to get a new valid set of coordinates that fullfil the required gap distance
    for nc = 1:NCIRCLES
        tnc = 2*pi*rand(usersPerCircle(nc),1);
%       rnc = 10*circleRadius(nc)*rand(usersPerCircle(nc),1);
        rnc = circleRadius(nc)*rand(usersPerCircle(nc),1);
        x = x0(nc) + rnc.*cos(tnc);
        y = y0(nc) + rnc.*sin(tnc);
        h = plot(x,y,".");
        set(h,'MarkerSize',8)
    end
    pause(NPAUSE)
    hold off
    
end

Khalid Khan 2022-5-18

I am already logged in but there is no such options I re-logged in but still no option even I am refreshing the webpage

Mathieu NOE 2022-5-18

ok no big problem here - don't spend too much time with that !

请先登录，再进行评论。

Answer 2

Allen 2022-5-24

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1721185-how-to-make-the-postions-of-each-circle-random#answer_970620

在 MATLAB Online 中打开

Just change your x0 and y0 variables to random value vectors and move them to within your primary for loop.

% Set the random number generator seed, for reproducibility
rng default
% Number of iterations to run the algorithm
NITER = 3;
% Number of seconds to pause after each figure
NPAUSE = 1;
% Fixed circle parameters
NCIRCLES = 7;
% x0  = [100 450 500 650 900 900 800]';
% y0  = [700 200 600 500 400 100 850]';
% Number of users
NUSERS = 100; % <--- Change this to 200
for ni = 1:NITER
    % Set x0 & y0 to random values. Using 900 as the maximum as this was
    % the max value previously defined. Use whatever max is appropriate.
    % Also, if x0 & y0 do not need to be integer values, use rand().
    x0 = randi(900,[NCIRCLES,1]);
    y0 = randi(900,[NCIRCLES,1]);
    userCircle = randi(NCIRCLES,NUSERS,1);
    usersPerCircle = histcounts(userCircle,1:NCIRCLES+1)';
    
    circleRadius = sqrt(usersPerCircle);
    
    figure
    axis square
    set(gca,"Box","on")
    grid on;
    set(gcf, 'units','normalized','outerposition',[0 0 1 1]);
    axis([0 1000 0 1000])
    fontSize = 10;
    xlabel('Position X (1000m)', 'FontSize', fontSize);
    ylabel('Position Y (1000m)', 'FontSize', fontSize);
    title('Random Users Within Circles', 'FontSize', fontSize);
    axis([0 1000 0 1000])
    hold on
    for nc = 1:NCIRCLES
        tnc = 2*pi*rand(usersPerCircle(nc),1);
        rnc = 10*circleRadius(nc)*rand(usersPerCircle(nc),1);
        x = x0(nc) + rnc.*cos(tnc);
        y = y0(nc) + rnc.*sin(tnc);
        h = plot(x,y,".");
        set(h,'MarkerSize',8)
    end
    pause(NPAUSE)
end

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

How to make the postions of each circle random?

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

采纳的回答

8 个评论
显示 6更早的评论隐藏 6更早的评论

更多回答（1 个）

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

How to make the postions of each circle random?

1 个评论 显示 -1更早的评论隐藏 -1更早的评论

采纳的回答

8 个评论 显示 6更早的评论隐藏 6更早的评论

更多回答（1 个）

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

8 个评论
显示 6更早的评论隐藏 6更早的评论

0 个评论
显示 -2更早的评论隐藏 -2更早的评论