How to measure the output impedance of single-phase and three-phase inverters connected to the grid?

Question

Jefferson 2022-5-25

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1726865-how-to-measure-the-output-impedance-of-single-phase-and-three-phase-inverters-connected-to-the-grid

编辑： Subin Puthenkalam 2022-6-28

Capturar.PNG

I need a method to measure the output impedance of single-phase and three-phase grid-connected inverters and then build the Bode diagram for the measured impedance.

Additionally, I am also interested in measuring the impedance seen by the grid.

The model I built was created in the following library: Simscape / Electrical / Specialized Power Systems

The schematic figure of the single-phase case is this:

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Joel Van Sickel 2022-6-13

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1726865-how-to-measure-the-output-impedance-of-single-phase-and-three-phase-inverters-connected-to-the-grid#answer_984665

I would start with this block: https://www.mathworks.com/help/physmod/sps/powersys/ref/impedancemeasurement.html

but more generically, you can use the frequency response estimator tool in simulink control design to extract frequency response of your circuit as well. Here are some useful links if you want to look at more customizeable options:

https://www.mathworks.com/help/slcontrol/ug/frequency-response-estimation-to-measure-input-admittance-of-boost-converter.html

https://www.mathworks.com/help/physmod/simscape/ug/linearize-an-electronic-circuit.html

Regards,

Joel