Plotted image is clear but saved image is blurry- why?

Question

Rachel Dawn 2022-6-28

1
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1749905-plotted-image-is-clear-but-saved-image-is-blurry-why

编辑： DGM 2022-6-29

在 MATLAB Online 中打开

I'm using the 99 line topology optimization code (found here -click the link "top.m").

When I run the following code in a separate script file (calling the top.m function)

top(30,10,0.5,3.0,1.5)

Lines 35-36 of this top.m function (shown below) plot the generated image (also shown below):

% PLOT DENSITIES  
colormap(gray); imagesc(-x); axis equal; axis tight; axis off;pause(1e-6); 

In order to save the generated image (not the plot), I modify the first line of the top.m function by adding "x=" (this returns the pixel data):

function x=top(nelx,nely,volfrac,penal,rmin);

Then, in a separate script file, I run the following code:

x_result=top(30,10,0.5,3.0,1.5)
image=-x_result; % invert the image
% because the values are less than 0 if you save it and read it again you'll see the image corrupted 
% so need to scale it to be between 0 to 1
image=(image-min(image,[],'all'))/(max(image,[],'all')-min(image,[],'all'));
%resize image so doesn't look so tiny
image=imresize(image,10);
folder_name='C:\Users\User\Documents\MATLAB\project\test'
name='saved_image'
imwrite(image,fullfile(folder_name,[name '.jpg']));

And, this is the resulting 'saved_image' that I find in my folder:

Why does it look like this (blurry) and not like the plotted image? I've tried saving the plot instead but then this saves the image with a bunch of white space around it (like the image shown below). Mainly, I just want to know why they come out so different - and how do I know which is the "correct" or "accurate" image to save?

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

DGM 2022-6-28

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1749905-plotted-image-is-clear-but-saved-image-is-blurry-why#answer_995845

编辑：DGM 2022-6-28

在 MATLAB Online 中打开

If you want to retain the crisp edges of the original low-resolution image, you cannot use a continuous interpolant. The default for imresize() is 'bicubic'. Specify 'nearest' in the call to imresize(). You'll get a larger version of the image with the same blocky appearance. Obviously, the scaling factor should be an integer.

Consider the example:

A = imread('cameraman.tif');

A = imcrop(A,[104 49 32 31]);

imshow(A) % low-resolution image

% enlarge that tiny image by a factor of 6

Abicubic = imresize(A,6,'bicubic');

Anearest = imresize(A,6,'nearest');

montage({Abicubic Anearest})

Jonas is also right; don't use JPG for anything, especially not for technical purposes, and especially not in MATLAB.

2 个评论
显示无隐藏无

Rachel Dawn 2022-6-29

Hi, thanks for the help. So, the blocky image (the face on the right) is the lower resolution one? Also, I changed it to .png but it didn't change anything about the image's appearance.

DGM 2022-6-29

编辑：DGM 2022-6-29

The first image is 32x33 (the low resolution original)

Both of the other images are 192x198. Both of the latter images have the same resolution; the only difference is the method of interpolation.

The differences between JPG and PNG are not major contributors to the effect you're seeing, but MATLAB uses relatively low quality (70% iirc) defaults and an unchangeable 4:2:0 chroma subsampling when saving JPG images. For any technical needs where:

accuracy matters
the image may need to be post-processed or published
edges and small features need to be preserved

using JPG will be counterproductive. It's just a general advice to avoid it unless you're prepared to live with the potential shortcomings.

请先登录，再进行评论。

Answer 2

Jonas 2022-6-28

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1749905-plotted-image-is-clear-but-saved-image-is-blurry-why#answer_995810

编辑：Jonas 2022-6-28

use png instead of jpg, then no compression is applied and the quality will stay good

there ate several methods whichbaffect the output apprarance, e.g. the Quality parameter

set Mode do lossless to make sure that no compression is applied. note that a Quality of 100 also does according to the documentation not mean that no compression is applied