How to convert 3D rgb image taken with ir filter removed webcam to 4D NIR image

Question

Uimin Lee 2022-7-7

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1755225-how-to-convert-3d-rgb-image-taken-with-ir-filter-removed-webcam-to-4d-nir-image

回答： Binaya 2023-9-28

I took the picture after removing the ir filter on the webcam.

The photo has a three-dimensional rgb format. My qustion is how to convert it to a four-dimensional format to check whether the image contains information of the nir spectrum.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Binaya 2023-9-28

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1755225-how-to-convert-3d-rgb-image-taken-with-ir-filter-removed-webcam-to-4d-nir-image#answer_1320639

Hi Uimin, 

The cameras after removing the IR filter can capture the NIR spectrum of visible light. The cameras do not record each individual frequency but record the intensity of these frequencies as a component of RGB. So, the NIR portion of the image adds more intensity towards the R component of the image. This task is possible by extracting only the R component from the image and by adjusting brightness, contrast and applying different filters.

For more information please also refer to answers provided in the following MATLAB Answers post: “how to extract Near-IR (NIR) from an RGB image”

https://www.mathworks.com/matlabcentral/answers/16626-how-to-extract-near-ir-nir-from-an-rgb-image

I hope this helps. 

Regards 

Binaya 