Implementation Olympus camera Matlab

12 次查看（过去 30 天）

Tim Valkenier 2015-2-5

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/175663-implementation-olympus-camera-matlab

评论： sara mokbil 2015-3-21

Hello,

How can I acquire images in Matlab with a camera that is not supported by default by the Matlab image acquisition toolbox, like in my case with an Olympus camera. This is a 1394-firewire camera, so I thought it was possible to acquire images through the 'dcam' adaptor in Matlab. However, when I try to get access to the camera via the imaqhwinfo function, following output is generated:

>> imaqhwinfo

ans =

    InstalledAdaptors: {'dalsaifc'  'dcam'  'gentl'  'gige'  'hamamatsu'  'matrox'  'winvideo'}
        MATLABVersion: '8.2 (R2013b)'
          ToolboxName: 'Image Acquisition Toolbox'
       ToolboxVersion: '4.6 (R2013b)'

>> imaqhwinfo('dcam') Warning: No DCAM compliant devices were found. If you have a DCAM compliant device, refer to the DCAM troubleshooting section in the toolbox User's Guide for information on setting up your device.

ans =

       AdaptorDllName: 'C:\Program Files\MATLAB\R2013b\toolbox\imaq\imaqadaptors\win32\mwdcamimaq.dll'
    AdaptorDllVersion: '4.6 (R2013b)'
          AdaptorName: 'dcam'
            DeviceIDs: {1x0 cell}
           DeviceInfo: [1x0 struct]

In the device manager in windows, the camera is recognized in 'Imaging Devices' and is working properly in other software programs provided by Olympus. I also managed to get access to the SDK files, but I'm not sure nor familiar in the way they need to be used/implemented.

Lastly, when I run the 1394Camera Demo (as suggested by Mathworks Troubleshooting), the program indicates that there are no cameras found.

Any suggestions?

Thanks in advance!