Create a matrice in a for loop

1 次查看(过去 30 天)
Hey guys, thanks in advance,
I have this moving radar, that detects targets in a specific area, identified by pixels(xtarget,ytarget).
In the end I have this distance_matrix, where rows are the distance to the target(R1-R2-Rd) and the columns are the position of the radar, since this radar is moving.
waypoints are the position of the radar, and it has, 400 positions(1:400 pixels). But the distance_matrix I have, saves the distances in 1 x 400, whic is correct, but if I have more than 1 target in each column(i), this code only saves one distance. I wanted that distance_matrix was a matrix that if column (i) had more that one distance to save, saved all the distances along that column. So imagine i=200, and in i there are 3 distances to save, so in i=200, distance_matrix should be 3x1 , and not 1x1 like I have, can you help me?
this image is a example when I run the code:
in waypoint=141, the radar detects target(100,325) and target(150,300), but when I go to distance_matrix, this has only one value of R1+R2-Rd, I want it to have two in this case
distance_matrix=zeros(1,length(waypoints)); % Define distance Signal matrix
R1_matrix=zeros(1,length(waypoints)); % Define distance Signal matrix
Rm_matrix=zeros(1,length(waypoints)); % Define distance Signal matrix
R2_matrix=zeros(1,length(waypoints)); % Define distance Signal matrix
for i=1:numel(waypoints) % For each waypoint
Y_transmitter = waypoints(i);
for xx=1:400
for yy=1:400
if AoI(xx,yy) ~= 0 % Target detection
....
if status ==1 & Pt ==1 & Pr ==1 & Wi_Surv ~=0 & Wi_transmit ~=0 % SAR Passive detection
....
R1=sqrt( (X_transmitter-X_target).^2 + (Y_transmitter-Y_target).^2); % Distance transmitter-target in meters
R2=sqrt( (X_receiver-X_target).^2 + (Y_receiver-Y_target).^2); % Distance Receiver-target in meters
Rd=sqrt( (X_receiverref-X_transmitter).^2 + (Y_receiverref-Y_transmitter).^2); % Distance Transmitter-Receiver in meters
distance_matrix(:,i)=R1+R2-Rd;
R1_matrix(:,i)=R1;
R2_matrix(:,i)=R2;
Rm_matrix(:,i)=X_transmitter-X_target;
end
end
end
end
end
  2 个评论
KALYAN ACHARJYA
KALYAN ACHARJYA 2022-7-17
"I wanted that distance_matrix was a matrix that if column (i) had more that one distance to save, saved all the distances along that column."
...
You may look for cell array , where rows are the distance to the target & columns are the position of the radar. In that case you can save multiple data points in same distance & position.
Am I understanding the question correctly?
Miguel Albuquerque
Miguel Albuquerque 2022-7-17
编辑:Miguel Albuquerque 2022-7-17
I thought of doing this
distance_matrix=cell(2,length(waypoints));
How can I solve this
for ....
distance_matrix(:,i)=R1+R2-Rd;
But i get this error:
Conversion to cell from double is not possible.
And I need to make the calculation in double, for the code that comes next

请先登录,再进行评论。

回答(1 个)

sai charan sampara
sai charan sampara 2023-10-18
Hello Miguel,
I understand that you are trying to find a way to create a matrix where each entry can be one or more values based on the number of distances to save.
You can try using cell arrays for this application. A cell array is a data type with indexed data containers called cells, where each cell can contain any type of data. You can use the distance and position of radar as the indexes. Then any number of data points can be added into each cell as an array based on the requirement.
The error “Conversion to cell from double is not possible” is because of incorrect indexing. Using parenthesis to index a cell array returns a cell as output. You are trying to assign a double value to a cell data type which throws an error. Hence when assigning a value to a cell in a cell array use curly brackets (“{}”) to index the cell array. It can be done like the code below.
C = {'2017-08-16',[56 67 78]}
C = 1×2 cell array
{'2017-08-16'} {[56 67 78]}
C(2,:) = {'2017-08-17',[58 69 79]};
C(3,:) = {'2017-08-18',[60 68 81]}
C = 3×2 cell array
{'2017-08-16'} {[56 67 78]} {'2017-08-17'} {[58 69 79]} {'2017-08-18'} {[60 68 81]}
C(1,:)
ans = 1×2 cell array
{'2017-08-16'} {[56 67 78]}
C{1,2} = [55 68 78]
C = 3×2 cell array
{'2017-08-16'} {[55 68 78]} {'2017-08-17'} {[58 69 79]} {'2017-08-18'} {[60 68 81]}
You can refer to the below documentation to learn more about cell arrays:
Hope this helps.
Thanks,
Charan.

类别

Help CenterFile Exchange 中查找有关 Detection, Range and Doppler Estimation 的更多信息

标签

产品

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by