How to determine the sampling rate of a deterministic Channel Model from Ray Tracing

3 次查看（过去 30 天）
Calvin Baek
Calvin Baek 2022-7-26
回答： Balavignesh 2023-10-9
For a project I am working on, I was looking into the 'Indoor MIMO-OFDM Communication Link using Ray Tracing' example:
https://nl.mathworks.com/help/comm/ug/indoor-mimo-ofdm-communication-link-using-ray-tracing.html#IndoorCommLinkUsingRayTracingExample-9
In the Deterministic Channel Model from Ray Tracing section, the sampling rate of the channel is set to 300e6. Now, I was wondering why exactly this sampling rate was used and what parameters have an influence on the channel sampling rate? How can you find the optimal value for this?
Thanks in advance!

请先登录，再回答此问题。

回答（1 个）

Balavignesh
Balavignesh 2023-10-9
Hi Calvin,
As per my understanding, you would like to understand how the sampling rate of the channel is set to 300e6.
The choice of the sample rate is influenced by the following factors:
  • Bandwidth of the channel: The channel model represents an indoor environment with multipath propagation, which led to a wide range of frequency components. The sampling rate of '300e6' is chosen to ensure the coverage of the channel's bandwidth.
  • Sampling: The sampling rate should be at least twice the maximum frequency component of the signal of interest to ensure the reconstruction of the original signal from its samples.
  • OFDM System Requirements: OFDM systems require a certain minimum sampling rate to ensure proper symbol detection and minimize inter-symbol interference.
Hope that helps!
Balavignesh

类别

在 Help Center 和 File Exchange 中查找有关 Propagation and Channel Models 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by