Hey Mujeeb,
I understand that you have implemented an adaptive incremental conductance algorithm for maximum power point tracking (MPPT) from a photovoltaic (PV) array. However, you are experiencing high oscillations and lower efficiency compared to the simple incremental conductance algorithm. Here are a few suggestions to improve your algorithm:
- Use a smaller step-size: The step size 'd' in your algorithm is currently set to 5e-2 times the absolute value of the change in power divided by the change in volume. This step size may be too large for your system, especially if the irradiance is varying rapidly. Try reducing the step size to a smaller value, such as 1e-3, and see if that improves the performance.
- Add a low-pass filter: High-frequency oscillations in the duty cycle can cause instability and reduce the efficiency of the MPPT algorithm. To reduce these oscillations, you can add a low-pass filter to smooth out the duty cycle. One way to implement a low-pass filter is to use a moving average of the duty cycle over the past few time steps.
- Use a different algorithm: The incremental conductance algorithm is known to have some limitations, especially under rapidly changing irradiance conditions. You may want to consider using a different MPPT algorithm, such as the Perturb and Observe (P&O) algorithm or the Extremum Seeking Control (ESC) algorithm, which may be more suitable for your system.
Hope this helps!
