USB relay not working

Question

Jessica Yorzinski 2022-8-27

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1788530-usb-relay-not-working

评论： Jessica Yorzinski 2022-8-28

I am using this USB relay:

SMAKN LCUS-1 type USB relay module USB intelligent control switch USB switch

To power a dosing pump:

Gikfun 12V DC Dosing Pump Peristaltic Dosing Head with Connector For Arduino Aquarium Lab Analytic Diy AE1207

This is the python code that gets it working and also has this .exe installed (SerialSend.exe; https://batchloaf.wordpress.com/serialsend/):

subprocess.check_output("serialsend.exe /baudrate 9600 /hex \\xA0\\x01\\x01\\xA2", shell=True)

time.sleep(10)

subprocess.check_output("serialsend.exe /baudrate 9600 /hex \\xA0\\x01\\x00\\xA1", shell=True)

Any tips in converting this to Matlab? I’ve tried this but nothing happens:

relayopen='\\xA0\\x01\\x01\\xA2';

relayclose='\\xA0\\x01\\x00\\xA1';

Ports=serialportlist;

JuicePort=Ports(3);

s=serial(JuicePort);

fopen(s)

fprintf(s,relayopen)

fclose(s)

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Walter Roberson 2022-8-27

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1788530-usb-relay-not-working#answer_1035665

在 MATLAB Online 中打开

relayopen = '\xA0\x01\x01\xA2';
relayclose = '\xA0\x01\x00\xA1';
Ports = serialportlist;
JuicePort = Ports(3);
s = serial(JuicePort, 'BaudRate', 9600);
fopen(s)
fprintf(s,relayopen)
fclose(s)

Note that serial() is going to go away, and you should change to serialport()

3 个评论
显示 1更早的评论隐藏 1更早的评论

Walter Roberson 2022-8-28

在 MATLAB Online 中打开

relayopen = 0xA00101A2;
relayclose = 0xA00100A1;
Ports = serialportlist;
JuicePort = Ports(3);
s = serial(JuicePort, 'BaudRate', 9600, 'ByteOrder', 'bigendian');
fopen(s);
fwrite(s, relayopen);
sleep(5);
fwrite(s, relayclose);
fclose(s)

Jessica Yorzinski 2022-8-28

Thanks for giving me something else to try! Unfortunately, it is still the case that the pump isn't triggered (even though that Python code running on the same machine does trigger it). There are no errors-- just nothing happens. Any other things I could try?

请先登录，再进行评论。