Stop button to interrupt push botton

Question

Julien Maxime 2022-10-7

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1819375-stop-button-to-interrupt-push-botton

评论： Allen 2022-10-19

Hello,

I have created a push botton (PlotButtonPushed) that automatically increase the value of a slider (sliderChangingFcn) which updates figures data on uifigure().

Now, I would like to create a push/stop button that would interrupt the slider increase and get out of its loop but i am having hard time to implement it.

I tried, as seen in the code below but it does not work. I think I still don't really understand the button's syntax. I also thought of having a state button to replace push and stop buttons but i did not manage to make it either.

Thank you for your help,

function sliderChangingFcn(~,event,data)
        % Previous camera angle loaded
        CP1 = ax1.CameraPosition;
        CP3 = ax3.CameraPosition;
        
        % Update plots and titles with new selection of data
        value = round(event.Value);
        Vq = interp2(data(:,:,value),Xq, Yq, 'cubic');
        
        %Actualisation InterP surface
        heatObj1 = surf(ax1, Xq, Yq, Vq, "EdgeColor", 'none');
        set(ax1.Title,'String',sprintf('Electrode Fluorescence Interpolated Surface - Frame #%d',value));
        ax1.CameraPosition = CP1;
        colormap (ax1, turbo)
        %Actualisation InterP colorfill
        heatObj2 = pcolor(ax2, Xq, Yq, Vq);
        set(heatObj2,'edgecolor','none')
        set(ax2.Title,'String',sprintf('Electrode Fluorescence Interpolated Surface - Frame #%d',value));
        %Actualisation Raw surface
        heatObj3 = surf(ax3, data(:,:,value));
        set(ax3.Title,'String',sprintf('Electrode Fluorescence Raw Surface - Frame #%d',value));
        ax3.CameraPosition = CP3;
        colormap (ax3, turbo)
        %Actualisation Raw heatmap
        %heatObj4 = heatmap(uip, data(:,:,value),'Colormap', turbo,'CellLabelColor', 'none','ColorLimits', [-400 300]);
        heatObj4.ColorData = data(:,:,value);
        heatObj4.Title = sprintf('Electrode Fluorescence Heatmap - Frame #%d',value);
        
    end
    a=0;
    function StopButton(~)
        a=1;
    end 
 
  
    function plotButtonPushed(a)
        uis=2;  
        while uis < n
            Vq = interp2(data(:,:,uis),Xq, Yq, 'cubic');
            heatObj1 = surf(ax1, Xq, Yq, Vq, "EdgeColor", 'none');
            set(ax1.Title,'String',sprintf('Electrode Fluorescence Interpolated Surface - Frame #%d',uis));
                       
            %Actualisation InterP colorfill
            heatObj2 = pcolor(ax2, Xq, Yq, Vq);
            set(heatObj2,'edgecolor','none')
            set(ax2.Title,'String',sprintf('Electrode Fluorescence Interpolated Heatmap - Frame #%d',uis));
                
            %Actualisation Raw surface
            heatObj3 = surf(ax3, data(:,:,uis));
            set(ax3.Title,'String',sprintf('Electrode Fluorescence Raw Surface - Frame #%d',uis));
               
            %Actualisation Raw heatmap
            %heatObj4 = heatmap(uip, data(:,:,value),'Colormap', turbo,'CellLabelColor', 'none','ColorLimits', [-400 300]);
            heatObj4.ColorData = data(:,:,uis);
            heatObj4.Title = sprintf('Electrode Fluorescence Raw Heatmap - Frame #%d',uis);
            uis = uis + t;
            pause(0.01)
            if  a == 1
                break
            end
        end
    end

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Jiri Hajek 2022-10-7

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1819375-stop-button-to-interrupt-push-botton#answer_1068620

There is some confusion in the way you use callbacks.

When you use a state button (or a switch) to interrupt a running for loop, the logical expression of the while loop must receive the information about a change in that value. So the logical expression must be checking the value of a global variable, in this case the Value property of your state button or a switch...

8 个评论
显示 6更早的评论隐藏 6更早的评论

Julien Maxime 2022-10-7

在 MATLAB Online 中打开

I modified to that but still does not work.

btn = uibutton(fig,'state',...
               'Text', 'Video',...
               'Value', false,...
               'Position',[50,40, 100, 22]);
function StateButton()
        if btn.Value == true
            uis=2;
            while uis < n
                Vq = interp2(data(:,:,uis),Xq, Yq, 'cubic');
    
                heatObj1 = surf(ax1, Xq, Yq, Vq, "EdgeColor", 'none');
                set(ax1.Title,'String',sprintf('Electrode Fluorescence Interpolated Surface - Frame #%d',uis));
                           
                %Actualisation InterP colorfill
                heatObj2 = pcolor(ax2, Xq, Yq, Vq);
                set(heatObj2,'edgecolor','none')
                set(ax2.Title,'String',sprintf('Electrode Fluorescence Interpolated Heatmap - Frame #%d',uis));
                    
                %Actualisation Raw surface
                heatObj3 = surf(ax3, data(:,:,uis));
                set(ax3.Title,'String',sprintf('Electrode Fluorescence Raw Surface - Frame #%d',uis));
                   
                %Actualisation Raw heatmap
                %heatObj4 = heatmap(uip, data(:,:,value),'Colormap', turbo,'CellLabelColor', 'none','ColorLimits', [-400 300]);
                heatObj4.ColorData = data(:,:,uis);
                heatObj4.Title = sprintf('Electrode Fluorescence Raw Heatmap - Frame #%d',uis);
                uis = uis + t;
                pause(0.01)
            end 
        if btn.Value == false
            uis=1;
        end
end

Julien Maxime 2022-10-7

在 MATLAB Online 中打开

Yes I am doing it manually i like to control and understand everything I code... On version R2022b.

Thanks for your help. With the push button, a linked function is created using 'ButtonPushedFcn', @(btn,event) plotButtonPushed(btn)); but it is not valid with state button. Then I don't understand, should I include while loop in a function too ? In the datasheet from Matlab website they explain how to create and the type of value of State button but there are no exemples with function etc...

Here is my the last update of the code, with the state button not working.

btn = uibutton(fig,'state',...
               'Text', 'Video',...
               'Value', false,...
               'Position',[50,40, 100, 22]);
uis=2;
    while uis < n && (btn.Value == true)
        Vq = interp2(data(:,:,uis),Xq, Yq, 'cubic');
        heatObj1 = surf(ax1, Xq, Yq, Vq, "EdgeColor", 'none');
        set(ax1.Title,'String',sprintf('Electrode Fluorescence Interpolated Surface - Frame #%d',uis));
                   
        %Actualisation InterP colorfill
        heatObj2 = pcolor(ax2, Xq, Yq, Vq);
        set(heatObj2,'edgecolor','none')
        set(ax2.Title,'String',sprintf('Electrode Fluorescence Interpolated Heatmap - Frame #%d',uis));
            
        %Actualisation Raw surface
        heatObj3 = surf(ax3, data(:,:,uis));
        set(ax3.Title,'String',sprintf('Electrode Fluorescence Raw Surface - Frame #%d',uis));
           
        %Actualisation Raw heatmap
        %heatObj4 = heatmap(uip, data(:,:,value),'Colormap', turbo,'CellLabelColor', 'none','ColorLimits', [-400 300]);
        heatObj4.ColorData = data(:,:,uis);
        heatObj4.Title = sprintf('Electrode Fluorescence Raw Heatmap - Frame #%d',uis);
        uis = uis + t;
        pause(0.01)
    end 

Julien Maxime 2022-10-7

Well i am not gonna restart my whole interface on AppDesigner for this small problem. Thanks for your kind help anyway.

Allen 2022-10-19

@Julien Maxime App Designer does a couple of things to facilitate the type of behavior you looking to emulate. Upon running the *.mlapp file containing the classdef code it creates an output argument (app) that is passed along during UIObject callback execution. Additionally, it automatically generates a unique property for each UIObject and assigns the properties to the app argument. This allows the properties of each UIObject to be accessed during the execution of any given callback.

For example, you should be able to access the value of the statebutton during the while-loop even when the state of the button changes, which would provide feedback to end the loop when desired. You can certainly program all of that functionality manually, which would require a lot of effort for applications consisting of more than a handful of UIObjects, but becomes a menial task within App Designer.

请先登录，再进行评论。

Stop button to interrupt push botton

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

回答（1 个）

8 个评论
显示 6更早的评论隐藏 6更早的评论

另请参阅

类别

标签

Community Treasure Hunt

Stop button to interrupt push botton

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

回答（1 个）

8 个评论 显示 6更早的评论隐藏 6更早的评论

另请参阅

类别

标签

Community Treasure Hunt

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

8 个评论
显示 6更早的评论隐藏 6更早的评论