USB Camera not recognized by Imaqtool.

Question

Thomas Chansard 2015-3-18

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/183805-usb-camera-not-recognized-by-imaqtool

回答： Image Analyst 2015-3-24

Hello,

I'm using a USB Ximea. I have already installed the Ximea package and I can see my Camera with the XIMEA program. Unfortunatly after I ran Imaqtool on Matlab, the only one device I can see is my Webcam. I add : -GeniCam Interface -GiGe vision Hardware -OS Generic vision Interface -QImaging Hardware -USB Video I don't understand, I think I didn't forget anything.

Thank you for your support.

Thomas Chansard.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Sab 2015-3-24

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/183805-usb-camera-not-recognized-by-imaqtool#answer_172513

Hi Thomas,

I have or had more or less the same problem. At the moment I just found a not really satisfying workaround.

First, I just added the genicam-hardware-support packge to matlab to the existing os generic and NI-adapter. Like that matlab did not find the XIMEA camera at all. Then I removed all interfaces but the genicam interface and suddenly the camera was found by matlab and working as intended. However, as soon as I add another hardware support package the camera dissapears from the imaqtool hardware list.

I contacted XIMEA about this but so far I have no other solution. As far as you just need the XIMEA camera for your program it will work but as soon as you need other hardware interfaces parallel it won't work at the moment, at least for me...

I hope there will be a better solution soon...