How to find the valley of a PPG signal? It is getting confused with the dicrotic notch

Question

Anupama V 2022-11-6

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1844508-how-to-find-the-valley-of-a-ppg-signal-it-is-getting-confused-with-the-dicrotic-notch

评论： Star Strider 2023-1-4

采纳的回答： Star Strider

Screenshot (135).png

I used the following code:

[~,index]=findpeaks(PP,'MinPeakDistance',200);

invertedP = - PP;

%findpeaks(invertedP);

[~, indexes] = findpeaks(invertedP,'MinPeakProminence',3,'MinPeakDistance',200);

figure;

plot(PP); hold on; plot(indexes,PP(indexes),'rv','MarkerFaceColor','g');plot(index,PP(index),'rv','MarkerFaceColor','r');

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Star Strider 2022-11-6

1
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1844508-how-to-find-the-valley-of-a-ppg-signal-it-is-getting-confused-with-the-dicrotic-notch#answer_1092403

It would help to have the data, existing code, (and a more thorough description of the desired result).

In some instances, it is necessary to set two different threshold criteria (for 'MinPeakProminence' or 'MinPeakHeight' or others) and then use the appropriate set operations (such as setdiff) to return only the ones you want.

8 个评论
显示 6更早的评论隐藏 6更早的评论

Star Strider 2022-11-6

在 MATLAB Online 中打开

It would help to have some sort of key to whatever are in these structures.

That aside, this is able to distinguish the valleys from the dicrotic dnotches (most of the time) and returns the index locations correctly. It has problems when the diastolic valleys and dicrotic notches are of similar prominences, however adding a highpass filter to eliminate the baseline drift seems to have solved that.

I chose the 1 Hz filter passband empirically based on my experience with physiological signals. It appears to have corrected the problem of misclassified dicriotic notches and diastolic valleys, however I did not rigorously examine the entire signal. (If the empirical approach had not worked, I would have calculated the fft of the signal, and used that result to design the filter.)

Try this —

LD = load(websave('0127_8min','https://www.mathworks.com/matlabcentral/answers/uploaded_files/1183088/0127_8min.mat'))

LD = struct with fields:

SFresults: [1×1 struct] labels: [1×1 struct] meta: [1×1 struct] param: [1×1 struct] reference: [1×1 struct] signal: [1×1 struct]

ppg = LD.signal.pleth.y;

L = numel(ppg);

Fs = LD.param.samplingrate.pleth;

t = linspace(0, L-1, L).'/Fs;

% ck = 1/t(2)

ppgf = highpass(ppg, 1, Fs);

[pks,plocs] = findpeaks(ppgf, 'MinPeakProminence',5); % Systolic Peaks & Indices

[vys,vlocs] = findpeaks(-ppgf, 'MinPeakProminence',5); % Diastolic Valleys & Indices

[dns,nlocs] = findpeaks(-ppgf, 'MinPeakProminence',1); % Dicrotic Notehes % Indices

Szm1 = [size(plocs); size(vlocs); size(nlocs)]

Szm1 = 3×2

615 1 615 1 1228 1

Lv = ismember(nlocs,vlocs); % Indices Of Valley Locations In Dicrotic Notch Locations

vlocs = nlocs(Lv); % 'Pure' Valley Locations

nlocs = nlocs(~Lv); % 'Pure' Dicrotic Notch Locations

dns = dns(~Lv); % Dicrotic Notch Values

Szm2 = [size(plocs); size(vlocs); size(nlocs)]

Szm2 = 3×2

615 1 615 1 613 1

figure

plot(t, ppgf, 'DisplayName','Photoplethysmograph Signal (Highpass Filtered)')

hold on

plot(t(plocs), pks, '^r', 'DisplayName','Systolic Peaks')

plot(t(vlocs), -vys, 'vr', 'DisplayName','Diastolic Valleys')

plot(t(nlocs), -dns, 'sr', 'DisplayName','Dicrotic Notches')

hold off

grid

xlabel('Time (s)')

ylabel('PPG Signal')

legend('location','best')

xlim( [0 10])

.

Star Strider 2022-11-6

As always, my pleasure!

Sure!

Lv = ismember(nlocs,vlocs); % Indices Of Valley Locations In Dicrotic Notch Locations

vlocs = nlocs(Lv); % 'Pure' Valley Locations

nlocs = nlocs(~Lv); % 'Pure' Dicrotic Notch Locations

dns = dns(~Lv); % Dicrotic Notch Values

The findpeaks call that returns the dicrotic notch locations (‘nlocs’) also returns the diastolic valley locations (‘vlocs’). The ismember call separates them so that it returns a logical vector (‘Lv’) of the values for ‘nlocs’ that are also in ‘vlocs’ however ‘vlocs’ returns only the diastolic valley locations. Thne result of those operations separates them so that after them, ‘vlocs’ contains only the diastolic valley locations and ‘nlocs’ contains only the dicrotic notch locations. The ‘Lv’ variable is then used to return only the dicrotic notch locations in ‘nlocs’ (so they no longer also contain and index into the diastolic valley locations), and the dicrotic notch values in ‘dns’.

It is difficult to describe here, so one way to understand it would be to remove the semicolons from those assignments to see what they produce. That demonstrates that ‘Lv’ returns true values for the locations that are common to both arguments, and false values for locations that are only in ‘nlocs’. Then ‘Lv’ (the true values) are used to identify ‘vlocs’ and its logical complement ‘~Lv’ (the false values) are used to identify ‘nlocs’ and ‘dns’, completely separating them. (In MATLAB, the ~ operator when used with a logical value negates it, so ~true=flase and ~false=true.)

.

Anupama V 2023-1-4

0009_8min.mat.mat

In the attached code,all starts of the peak is getting detected. From this how to filter out dicrotic notch and valley? I am attaching my signal below.

LD = load('C:\Users\ANU\Desktop\TBME2013-PPGRR-Benchmark_R3\data\0009_8min.mat.mat')

% remove first trough:

ppg = LD.signal.pleth.y;

ppg(1:10) = [];

% indentify all peaks

[all_peak_value,all_peak_location]= findpeaks(ppg);

% identify all troughs in data

[all_trough_value,all_trough_location]= findpeaks(-ppg);

all_trough_value = -all_trough_value;

% identify main peak (i.e. ones lower than 5)

[main_trough_value,main_trough_location]= findpeaks(ppg,'MinPeakProminence',5);

counter = 0;

for i = 1:length(main_trough_location)

%c=[];

start=main_trough_location(i)-100;

ending=main_trough_location(i);

%c= (all_trough_location>start & all_trough_location<ending);

%c1=c(end);

[r,c] = find(all_trough_location>start & all_trough_location<ending);

end

figure

plot(ppg,'r')

hold on

plot(all_trough_location,all_trough_value,'ko')

Star Strider 2023-1-4

在 MATLAB Online 中打开

I do not understand what you want to do.

I do not see any specific dicrotic notches (that would concern me if I knew the corresponding blood pressures), only the individual pulse diastolic minima. The EKG R-deflection (that I added to the plot) approximately corresponds to the diastolic minimum, as I would expect.

There appears to be a periodic baseline variation in the PPG signal that should be straightforward to eliminate with a highpass or bandpass filter.

LD = load(websave('0009_8min.mat','https://www.mathworks.com/matlabcentral/answers/uploaded_files/1251227/0009_8min.mat.mat'))

LD = struct with fields:

SFresults: [1×1 struct] labels: [1×1 struct] meta: [1×1 struct] param: [1×1 struct] reference: [1×1 struct] signal: [1×1 struct]

Fs = LD.param.samplingrate.pleth; % Sampling Frequency

EKG = LD.signal.ecg.y;

L = numel(EKG);

tv = linspace(0, L-1, L)/Fs; % Time Vector

% remove first trough:

ppg = LD.signal.pleth.y;

ppg(1:10) = [];

% indentify all peaks

[all_peak_value,all_peak_location]= findpeaks(ppg);

% identify all troughs in data

[all_trough_value,all_trough_location]= findpeaks(-ppg);

all_trough_value = -all_trough_value;

% identify main peak (i.e. ones lower than 5)

[main_trough_value,main_trough_location]= findpeaks(ppg,'MinPeakProminence',5);

counter = 0;

for i = 1:length(main_trough_location)

%c=[];

start=main_trough_location(i)-100;

ending=main_trough_location(i);

%c= (all_trough_location>start & all_trough_location<ending);

%c1=c(end);

[r,c] = find(all_trough_location>start & all_trough_location<ending);

end

figure

plot(tv(11:end), ppg,'r')

hold on

plot(tv(all_trough_location),all_trough_value,'ko')

plot(tv, EKG) % Add EKG Plot

xlim([0 6.5])

.

请先登录，再进行评论。

How to find the valley of a PPG signal? It is getting confused with the dicrotic notch

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

8 个评论
显示 6更早的评论隐藏 6更早的评论

更多回答（0 个）

另请参阅

类别

标签

Community Treasure Hunt

How to find the valley of a PPG signal? It is getting confused with the dicrotic notch

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

8 个评论 显示 6更早的评论隐藏 6更早的评论

更多回答（0 个）

另请参阅

类别

标签

Community Treasure Hunt

WeChat

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

8 个评论
显示 6更早的评论隐藏 6更早的评论