LaTex Interpreter does not work correctly?

2022 12 29
2 个回答
回答已采纳
更新时间：2022 12 30
57 次查看（30 天）

0 个投票

Dear Helpers,
I'd like to plot some data and annotate the YAxis according to the following code using the latex interpreter:
plot(Tx',drhodT','LineWidth',1.5)
legend(LoF,'Location','eastoutside')
grid on
xlabel('Temperature [K]')
ylabel('$\frac{\partial\rho}{\partial T}$ [kg/m³/K]','Interpreter','latex')
When plot appears, also following error message is enclosed.
I wonder why the error message shows two backslashed instead of one single backslash which I coded.How to rectify this problem.
Looking forward to receiving your suggestions.
Best regards
Tom

请先登录，再回答此问题。

 采纳的回答

Walter Roberson
Walter Roberson 2022-12-29

0 个投票

ylabel('$\frac{\partial\rho}{\partial T} [kg/m^3/K]$','Interpreter','latex')
The ³ character is not accepted for latex
To correct for that you need to use ^ but that is only accepted inside $$
You should probably rewrite the unit using frac

3 个评论
显示 1更早的评论 隐藏 1更早的评论

Thomas Lex
Thomas Lex 2022-12-29
移动：Walter Roberson 2022-12-29
Hello Walter,
thank you for your quick answer.
Unfortunately, this did not rectify the issue. I tried your suggestion, but it did not work.
Since the ³ charakter is outside the latex environment, I think that is not the problem.
Best regards
Tom
Cameron
Cameron 2022-12-29
移动：Walter Roberson 2022-12-29
Ran in:
Ran in:
Walter's answer works for me.
plot(1:20,rand(1,20),'LineWidth',1.5)
legend('data','Location','eastoutside')
grid on
xlabel('Temperature [K]')
ylabel('$\frac{\partial\rho}{\partial T} [kg/m^3/K]$','Interpreter','latex')
Which version of MATLAB are you using?
Walter Roberson
Walter Roberson 2022-12-29
编辑：Walter Roberson 2022-12-29
Ran in:
Ran in:
Let us experiment:
figure()
subplot(1,4,1)
ylabel('\frac{\partial\rho}{\partial T} kg/ m³', 'interpreter', 'latex'); title('A1');
subplot(1,4,2)
ylabel('$\frac{\partial\rho}{\partial T} kg/ m³$', 'interpreter', 'latex'); title('A2');
subplot(1,4,3);
ylabel('\frac{\partial\rho}{\partial T} kg/ $m³$', 'interpreter', 'latex'); title('A3');
subplot(1,4,4);
ylabel('$\frac{\partial\rho}{\partial T} kg/$ m³', 'interpreter', 'latex'); title('A4');
Warning: Error updating Text.

String scalar or character vector must have valid interpreter syntax:
$\frac{\partial\rho}{\partial T} kg/$ m³
figure()
ylabel('m³', 'interpreter', 'latex'); title('AA1');
Warning: Error updating Text.

String scalar or character vector must have valid interpreter syntax:
m³
figure()
ylabel('$m³$', 'interpreter', 'latex'); title('AA2');
Warning: Error updating Text.

String scalar or character vector must have valid interpreter syntax:
$m³$
figure()
ylabel('m^3', 'interpreter', 'latex'); title('AA3')
Warning: Error updating Text.

String scalar or character vector must have valid interpreter syntax:
m^3
figure()
subplot(1,4,1)
ylabel('\frac{\partial\rho}{\partial T} kg/ m^3', 'interpreter', 'latex'); title('B1');
subplot(1,4,2)
ylabel('$\frac{\partial\rho}{\partial T} kg/ m^3$', 'interpreter', 'latex'); title('B2');
subplot(1,4,3)
ylabel('\frac{\partial\rho}{\partial T} kg/ $m^3$', 'interpreter', 'latex'); title('B3');
subplot(1,4,4)
ylabel('$\frac{\partial\rho}{\partial T} kg/$ m^3', 'interpreter', 'latex'); title('B4');
Warning: Error updating Text.

String scalar or character vector must have valid interpreter syntax:
$\frac{\partial\rho}{\partial T} kg/$ m^3
figure();
subplot(1,4,1)
ylabel('\frac{\partial\rho}{\partial T} kg/ m³', 'interpreter', 'tex'); title('C1');
subplot(1,4,2)
ylabel('$\frac{\partial\rho}{\partial T} kg/ m³$', 'interpreter', 'tex'); title('C2');
subplot(1,4,3)
ylabel('\frac{\partial\rho}{\partial T} kg/ $m³$', 'interpreter', 'tex'); title('C3');
subplot(1,4,4)
ylabel('$\frac{\partial\rho}{\partial T} kg/$ m³', 'interpreter', 'tex'); title('C4');
Warning: Error updating Text.

String scalar or character vector must have valid interpreter syntax:
$\frac{\partial\rho}{\partial T} kg/$ m³
figure();
subplot(1,4,1)
ylabel('\frac{\partial\rho}{\partial T} kg/ m^3', 'interpreter', 'tex'); title('D1');
subplot(1,4,2)
ylabel('$\frac{\partial\rho}{\partial T} kg/ m^3$', 'interpreter', 'tex'); title('D2');
subplot(1,4,3)
ylabel('\frac{\partial\rho}{\partial T} kg/ $m^3$', 'interpreter', 'tex'); title('D3');
subplot(1,4,4)
ylabel('$\frac{\partial\rho}{\partial T} kg/$ m^3', 'interpreter', 'tex'); title('D4');
Warning: Error updating Text.

String scalar or character vector must have valid interpreter syntax:
$\frac{\partial\rho}{\partial T} kg/$ m^3
You can see from AA1 and AA2 that you can include the ³ character in latex, and it will give you the ³ output, but that it will generate the warning message regardless of being inside $$ or not.
You can see that the only one of these that works as you would hope is B2: $\frac{\partial\rho}{\partial T} kg/ m^3$ intepreter latex.
You can see from the A series that when the ³ character is included, that the entire string goes uninterpreted and is just put up (some as if you used interpreter 'none')
You can also see that when you use ^ to get the raised 3, then that can work -- but only if you are inside $$

请先登录，再进行评论。

更多回答（1 个）

Thomas Lex
Thomas Lex 2022-12-30

0 个投票

Hello Walter, hello Cameron,
thanks for your contributions.
Interesting insights. Obiously Matlab is very sensitive on what is written within the '...' when Interpreter ist activated for LaTex Following label worked fine
ylabel('Dichteaenderung $\, \left.\frac{\partial\rho}{\partial T}\right|_{x=0} [kg/m^3/K]$','Interpreter','latex')
But the line
ylabel('Dichteänderung $\, \left.\frac{\partial\rho}{\partial T}\right|_{x=0} [kg/m^3/K]$','Interpreter','latex')
did not work even though the word Dichteänderung ist not inside the $ $ environment. Which is obviouly due to the ä and which is the case for the ³. Both are non standard ascii characters.
Thanks a lot to you guys, who helped me to improve my Matlab knowledge!
My conclusion: When Latex-Interpreter is activated for text, labels, tilles etc., never use any non standard ascii character inside the inverted commas ' ' .
I would be happy to see this statement in the correspondent Matlab Help Center pages.
Best regards
Tom

1 个评论
显示 -1更早的评论 隐藏 -1更早的评论

Cameron
Cameron 2022-12-30
This worked for me.
ylabel('$Dichte\ddot{a}nderung \, \left.\frac{\partial\rho}{\partial T}\right|_{x=0} [kg/m^3/K]$','Interpreter','latex')

请先登录，再进行评论。

类别

在 帮助中心 和 File Exchange 中查找有关 Data Type Conversion 的更多信息

产品

版本

R2022b

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by