Use Double Array Values to Label Plot

23 次查看(过去 30 天)
I have a variable 'xx' that is a 1x9 double. I want to use those values to label the points along the line in plot(t,xx)
This is my code
Ts = 1/8;
t = 0:Ts:1;
x = @(t) cos(2*pi*t-(pi/2));
xx = x(t);
labels = {'Sample 1', 'Sample 2', 'Sample 3', 'Sample 4', 'Sample 5', 'Sample 6', 'Sample 7', 'Sample 8', 'Sample 9'};
plot(t,xx,'rd-', 'linewidth', 1.5, 'MarkerSize', 9, 'MarkerFaceColor', 'w'), grid on
text(t,xx,labels)
  2 个评论
cdawg
cdawg 2023-1-28
Would making labels = string(xx) work?
Ts = 1/8;
t = 0:Ts:1;
x = @(t) cos(2*pi*t-(pi/2));
xx = x(t);
labels = string(xx);
plot(t,xx,'rd-', 'linewidth', 1.5, 'MarkerSize', 9, 'MarkerFaceColor', 'w'), grid on
text(t,xx,labels)
collegestudent
collegestudent 2023-1-28
But I also need to label each point with the correct sample number

请先登录,再进行评论。

采纳的回答

dpb
dpb 2023-1-28
"Would making labels = string(xx) work?"
Did you try?
It works for a basic definition of what "working" might mean; you might find something like
text(t,xx,compose('%0.3f',xx))
more pleasing to the eye. Investigate the named parameters to text regarding position the text so as to not write on top of the data itself...
  2 个评论
cdawg
cdawg 2023-1-28
@dpb is right, it does look much better. If you want to include the sample number in there as well, try something like this
Ts = 1/8;
t = 0:Ts:1;
x = @(t) cos(2*pi*t-(pi/2));
xx = x(t);
for ii = 1:length(xx)
label{ii} = sprintf('Sample %d: %0.3f', ii, xx(ii));
end
figure();
plot(t,xx,'rd-', 'linewidth', 1.5, 'MarkerSize', 9, 'MarkerFaceColor', 'w'), grid on
text(t,xx,label)
I'm sure there's an easier way to do it without a for loop...
And again dpb is right- as you can see the positioning of the labels doesn't look very good. You'll have to mess around with the location of the labels (or add the Sample label and the data label separately..)
dpb
dpb 2023-1-28
编辑:dpb 2023-1-29
Try something more like
Ts = 1/8;
t = 0:Ts:1;
xx = cos(2*pi*t-(pi/2)); % no need for the anonymous function here...
plot(t,xx,'rd-', 'linewidth', 1.5, 'MarkerSize', 9, 'MarkerFaceColor', 'w'), grid on
ylim(1.2*ylim)
hold on
labels=compose('Sample: %d\n%0.3f',[1:numel(xx)].',xx.');
hT=text(t+0.025,xx+0.05,labels);
hT(end).HorizontalAlignment='right';
hT(end).Position=[1-0.025 0.1];
for starters. One can always be more clever about trying to locate where place annotations based on actual data and anything known a priori about shape of curve, etc., to minimize occluding data more than necessary.
The fixup here for the last position to place it to the left instead of the right owing to knowing it will run off the RH side otherwise, is one obvious nicety.

请先登录,再进行评论。

更多回答(0 个)

类别

Help CenterFile Exchange 中查找有关 Axis Labels 的更多信息

产品


版本

R2022b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by