清空筛选条件
清空筛选条件

timer period resolution issue

5 次查看（过去 30 天）
Rakesh
Rakesh 2023-2-7
评论： Rakesh 2023-2-11
Hi all,
I am using MATLAB 2022b version.
I am developing a script which sends the packet at every 10 msec.
I configured the timer in free running mode with the period of 10 msec and then started storing the time stamp value in an array at each interrupt in my timer ISR.
Then plotted the difference between the time stamp values ,we are observing that the timer interrupt is varying from 7msec to 15msec.
But when the same calculations are carried out for 1sec period, we have observed that max error was 2msec .
Can you please provide me a wayout to configure the timer at 10 msec period.

请先登录，再回答此问题。

回答（2 个）

Dr. JANAK TRIVEDI
% Start timer
t = timer('TimerFcn',@timerISR, 'Period', 10/1000, 'ExecutionMode', 'fixedRate');
start(t);
% Timer ISR function
function timerISR(~,~)
tic; % Start measuring processing time
% Code to store time stamp value in an array
processingTime = toc; % End measuring processing time
set(t,'Period',(10 - processingTime)/1000); % Adjust timer period
end
  1 个评论
Rakesh
Rakesh 2023-2-11
Hi Janak,
Thanks for the reply,
I have checked with the same configuration,
When the period is given in seconds , the above code works fine,
But when the same is checked for less resolution i.e. msec , I am observing this issue.
Regards,
Rakesh

请先登录，再进行评论。

Amal Raj
Amal Raj 2023-2-7
编辑：Amal Raj 2023-2-7
Hi Rakesh,
You can check out timer.
ExecutionMode can be set to 'fixedRate', so that the timer generates events at a fixed rate.
  1 个评论
Rakesh
Rakesh 2023-2-11
Hi Amal,
Thanks for the reply,
I had set the executionmode to fixedrate only,
The above observations is with executionMode Fixedrate .

请先登录，再进行评论。

类别

在 Help Center 和 File Exchange 中查找有关 Introduction to Installation and Licensing 的更多信息

标签

产品


版本

R2022b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by