reading serial COM port on the fly (weighting scale -> WinPC)

Question

LeChat 2023-3-7

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1924685-reading-serial-com-port-on-the-fly-weighting-scale-winpc

评论： Walter Roberson 2023-4-13

Hi,

I am trying to read on the fly output data from a serial COM port on a weighting scale (mine is a Sartorius Entris), on my PC (Matlab 2021b for Win10).

On the weighting scale my setup is:

Protocol: SBI

Baudrate: 9600

Parity: Odd

Hanshake: none

DataBits: 7 bits

In Device Manager I also checked that COM6 is active, and that I have the save Bits per sec., Data bits, Parity as before, and that Stop bits=1 and Flow control = None. The weighting scale is connected either with a broad serial to USB-A adapter, or a USB-C to USB-A adapter, depending of the version of weighting scale I am trying, I have an old one and a newer one with USB-C.

In Matlab, I do (it is from an older code in which I use serial() instead of the newer serialport() function but if you have a better version of this I am interested):

if (~isempty(instrfind))
    fclose(p);
    delete(instrfind)
    disp('instrfind empty!')
end
Warning: instrfind will be removed in a future release. There is no simple replacement for this.
close all;
clear all;
% %% set SERIAL PORT settings - Mac:
% p=serial('/dev/tty.usbserial-A101BF73','BaudRate',9600);
%% set SERIAL PORT settings - PC (Windows):
p=serial('COM6','BaudRate',9600);
Warning: serial will be removed in a future release. Use serialport instead.
If you are using serial with icdevice, continue using serial in this MATLAB release.
set(p,'Parity','odd','FlowControl','none'); % for SARTORIUS weighting-scale (factory settings)
%
%% use the output data to plot a live-updated plot
time  = [];
masse = [];
tic %time origin
lastingtime=100;%sec
%
figure(1)
%
while(toc <= lastingtime) % measurements during 100 sec.
    %first measurement
    s=fopen(p);%fgets(p);
    t=toc
    mass2 = sscanf(s,'N     %s    %f g');
    
    signe = mass2(1);% get measurement sign
    mass_abs = mass2(2);% get absolute value of curent measurement
    
    if signe == 43 % positive
        mass1 = mass_abs;
    elseif signe == 48 % nul
        mass1 = 0;
    elseif signe == 45 % negative
        mass1 = - mass_abs;
    end
    
    % save data
    mass = [mass;mass1];
    time  = [time ;t];
    % Plot data
    hold on
    plot(t,mass1,'-+r')
    title('Flowing mass')
    drawnow
end
Error using serial/fopen
Too many output arguments.

But at the line:

s=fopen(p);

Matlab gives me the following error:

Error using serial/fopen

Too many output arguments.

Error in myCode (line 54)

s=fopen(p);%fgets(p);

Would anyone know why I get this error?

Thank you for your help and ideas!

PS: I am leaving the rest of the code in case it is useful for the global understanding of what I am trying to do, and/or for other users.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Les Beckham 2023-3-7

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1924685-reading-serial-com-port-on-the-fly-weighting-scale-winpc#answer_1187675

编辑：Les Beckham 2023-3-7

在 MATLAB Online 中打开

The serial object overload of fopen doesn't have any output arguments, so change that line of code to the following.

fopen(p)

Also, you should move that line outside of the loop.

I think you also want to use fscanf instead of sscanf to read the data.

mass2 = sscanf(p, 'N %s %f g'); %<<< read from p (the serial object)

6 个评论
显示 4更早的评论隐藏 4更早的评论

LeChat 2023-4-7

在 MATLAB Online 中打开

Thank you both for your answer. (sorry for the delay of my response, I got carried away by job applications).

I tried the following, taking your proposals into account.

bitrate=9600;%=baudrate (bits/sec)
p=serialport('COM6',bitrate);
set(p,'Parity','none','FlowControl','none'); % for SARTORIUS weightning scale (factory settings)
time  = [];
masse = [];
% flowrate =[];
tic % time origin
figure(1)
while(toc <= 1000) % measurements during 1000 sec.
    t=toc;
    pause(0.5) %try, to slow down data transfert from weightning scale to PC
    %
    masse2 = sscanf(readline(p),'%s    %s    %f g\n');
    masse2(1)=[];
    signe = masse2(1);% get sign
    masse_abs = masse2(2);% get absolute value
    
    if signe == 43 % positive
        masse1 = masse_abs;
    elseif signe == 48 % zero
        masse1 = 0;
    elseif signe == 45 % negative
        masse1 = - masse_abs;
    end
    %
    disp([num2str(t),' s ## ', num2str(masse1),' g'])
    %
    % save data
    masse = [masse;masse1];
    time  = [time ;t];
    %     
    hold on
    plot(t,masse1,'-o','MarkerFaceColor','r','MarkerEdgeColor','k')
    title('Flowing mass')
    drawnow
end

But the mass value displayed on the scale's screen is not the same as compared to that received by the PC (somehow the PC data seems late, delayed). This time delay increases with time, in an uncontrolled fashion.

I tried the code on two different PCs, I changed the baudrate, the parity (with the Windows settings and the scales settings edited accordingly).

Would you have any idea why there is this delay in my measure?

Thank you

LeChat 2023-4-13

在 MATLAB Online 中打开

Thank you for both you answers. Actually, only plotting once every n (n=2 sec for instance) improved the reactivity of the script during the experiment. Thank you.

I also tried Walter's solution in order to do things the best way, using textscan, but I am not so familiar with cells I guess and could not get it to work. I tried:

mass1=str2num(cell2mat(masse2_cell{2}));

But the obtained value remains at zero. I will try again next week but if you think there is a syntax issue, please do not hesitate to tell me so, somehow I feel there must be a more direct way to do str2num(cell2mat(mycell{2})).

Thank you very much for your support. Stay well.

Walter Roberson 2023-4-13

在 MATLAB Online 中打开

If you were to use a %f format instead of a %s format then

   masse2_cell = textscan(readline(p),'%f    %s    %f');
   mass1 = masse2_cell{1};
   

and you could find out whether it was negative or positive by using sign instead of checking the first non-blank character of the representation.

请先登录，再进行评论。

reading serial COM port on the fly (weighting scale -> WinPC)

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

回答（1 个）

6 个评论
显示 4更早的评论隐藏 4更早的评论

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

reading serial COM port on the fly (weighting scale -> WinPC)

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

回答（1 个）

6 个评论 显示 4更早的评论隐藏 4更早的评论

另请参阅

类别

标签

产品

版本

Community Treasure Hunt

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

6 个评论
显示 4更早的评论隐藏 4更早的评论