Hi Mario,
- The error message indicates that the 'ousterlidar' class is not supported for code generation which means that it cannot be used directly in a Simulink model.
- One possible workaround is to create a MATLAB function that reads the data from the ousterlidar object and outputs the point cloud data as a variable. You can then call this function from your Simulink model using a MATLAB Function block.
- Here is an example MATLAB function that reads the data from the ousterlidar object and outputs the point cloud data as a variable:
function ptCloud = readPointCloud(obj)
% Create ousterlidar object
obj = ousterlidar("OS1-128","path to metadata.json file");
% Read point cloud data
ptCloud = read(obj);
end
To use the MATLAB Function block in your Simulink model, follow these steps:
1.Drag a MATLAB Function block from the Simulink Library Browser into your Simulink model.
2.Open the block by double-clicking on it.
3.In the "Function name" field, enter the name of the MATLAB function you created above (e.g., "readPointCloud").
4.In the "Inputs" and "Outputs" sections, specify the input and output ports for the block.
5.Save and close the block.
6.Connect the input and output ports of the MATLAB Function block to the other blocks in your Simulink model as needed.
7.Run the Simulink model to generate the point cloud data.
You can read more about the MATLAB Function Block from the following documentation: MATLAB Function Block.
Hope it helps!
