In the ee_dc_fast_charger project of MATLAB 2021b, what is the topology used in the plant models.

Question

Shivam 2023-3-29

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1937614-in-the-ee_dc_fast_charger-project-of-matlab-2021b-what-is-the-topology-used-in-the-plant-models

回答： Jack 2023-3-30

In the ee_dc_fast_charger project of MATLAB 2021b, what is the topology used in the plant models. There are two converters, FEC(Front End Converter) and DC-DC converter. I would like to know what topologies they are using.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Jack 2023-3-30

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1937614-in-the-ee_dc_fast_charger-project-of-matlab-2021b-what-is-the-topology-used-in-the-plant-models#answer_1204384

The ee_dc_fast_charger project in MATLAB 2021b uses a dual-stage power conversion topology. The Front-End Converter (FEC) is a single-phase boost PFC (Power Factor Correction) converter that operates in continuous conduction mode. The DC-DC converter is a two-phase interleaved buck converter that operates in continuous conduction mode.

The boost PFC converter is used as the first stage to ensure that the input current is in phase with the input voltage, which improves power factor and reduces harmonic distortion. The boost converter boosts the input voltage to a higher level, which is then fed to the second stage DC-DC converter. The DC-DC converter is used to regulate the output voltage and current to charge the battery.

The interleaved buck converter is used as the DC-DC converter to improve the efficiency and reduce the size and cost of the system. The two-phase interleaved buck converter reduces the input and output current ripple and increases the power handling capacity.

Overall, this dual-stage power conversion topology provides high efficiency, power factor correction, and reduced harmonic distortion.