Making two peaks into one

14 次查看（过去 30 天）
Joel
Joel 2023-4-6
评论： Mathieu NOE 2023-4-11
Hi
How can I make two peaking values into the highest.
I have these vectors (one double and one duration) showing the duration of the peaks (when the curve crosses the red threshold).
However some peaks have two peak values, making the double vector one element bigger than the duration vector. I want the vectors to be of the same length so only the highest peaking value of each peak show. So in this case row 9 of the max_val should be removed.
EFFEKT= 8760x1 double %One value for every hour of the year
Abonnemang=24200; %threshold value
t=8760x1 datetime %Every hour of the year
[max_val,locs] = findpeaks(EFFEKT,'MinPeakHeight',Abonnemang); % find the peak and its x axis location
[t0_pos1,s0_pos1,t0_neg1,s0_neg1]= crossing_V7(EFFEKT,t,Abonnemang,'linear'); % positive (pos) and negative (neg) slope crossing points
peak_width = t0_neg1- t0_pos1;
peak_width =peak_width
peak_width
max_val

请先登录，再回答此问题。

采纳的回答

Mathieu NOE
Mathieu NOE 2023-4-6
hello again
have a look at the help of findpeaks;
use this argument of findpeaks to keep only the tallest peak :
MinPeakDistance — Minimum peak separation
0 (default) | positive real scalar
Minimum peak separation, specified as a positive real scalar. When you specify a value for 'MinPeakDistance', the algorithm chooses the tallest peak in the signal and ignores all peaks within 'MinPeakDistance' of it. The function then repeats the procedure for the tallest remaining peak and iterates until it runs out of peaks to consider.
  • If you specify a location vector, x, then 'MinPeakDistance' must be expressed in terms of x. If x is a datetime array, then specify 'MinPeakDistance' as a duration scalar or as a numeric scalar expressed in days.
  • If you specify a sample rate, Fs, then 'MinPeakDistance' must be expressed in units of time.
  • If you specify neither x nor Fs, then 'MinPeakDistance' must be expressed in units of samples.
Use this argument to have findpeaks ignore small peaks that occur in the neighborhood of a larger peak.
  3 个评论
显示 1更早的评论
Joel
Joel 2023-4-10
Hello again
Thank you so much. I tried this and got max_val to a 9x1 double which matches to the peak_width. However
I had to try differnt values (30), what does it mean exactly? I got larger vectors with a small values and fewer for a bigger value:
[max_val,locs] = findpeaks(EFFEKT,'MinPeakHeight',Abonnemang); % find the peak and its x axis location
[max_val,locs] = findpeaks(EFFEKT,t,'MinPeakDistance',30);
Mathieu NOE
Mathieu NOE 2023-4-11
hello
look at the doc
you can combine multiple options (arguments) in one single call to findpeaks
if you use 'MinPeakDistance' with value = 30, that means you want no peaks that are closer than 30 samples (on the x axis) , so if you have 2 (and more) close by peaks, you can use that argument to keep only one (with the highest peak value)
NB you should combine the arguments :
[max_val,locs] = findpeaks(EFFEKT,'MinPeakHeight',Abonnemang,'MinPeakDistance',30);

请先登录，再进行评论。

更多回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Descriptive Statistics 的更多信息

标签

产品


版本

R2023a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by