The 'diff()' function is running incorrectly in this program (Error using diff Difference order N must be a positive integer scalar)

2 次查看（过去 30 天）
晨名
晨名 2023-4-12
评论： VBBV 2023-4-12
T_stop=10;
T_sample = 0.002;
x0 = [0;0;1/2*pi;0];
options=odeset('RelTol',1.0e-6,'AbsTol',1.0e-6,'BDF','on');
[t,x]=ode45(@(t,x) RIP_Sysm(t,x),[0:T_sample:T_stop],x0,options); % ode45解常微分方程
figure(1)
plot(t,x(:,1));title('时间-滑块A角度');
xlabel('t[s]');ylabel('\theta_A[rad]')
figure(2)
plot(t,x(:,3));title('时间-滑块D角度');
xlabel('t[s]');ylabel('\theta_D[rad]')
function dx = RIP_Sysm(t,x)
%% Constants
ml = 15;
Rp = 42.31;
dl = 127;
H0 = 124.8;
R = 124.24;
L = 147.72;
d = 9.4;
alfa = 12.83*pi/180;
Ix = 1000;
Iy = 1000;
Iz = 1000;
J = 10;
A(x) = (dl^2 + H0^2 + Rp^2 + R^2 - L^2 - 2 * dl * R * sin((x(1) - x(3))/2)) / (2 * Rp);
B(x) = (R^2 * (cos((x(1) - x(3))/2))^2 + H0^2)^0.5;
C(x) = R * cos((x(1) - x(3)) / 2);
b(x) = acos( C / B ) + alfa - acos( A / B );
a(x) = (x(1) - x(3)) / 2;
db_A = diff(b(x),x(1));
db_D = diff(b,x(3));
da_A = diff(a,x(1));
da_D = diff(a,x(3));

请先登录，再回答此问题。

回答（2 个）

VBBV
VBBV 2023-4-12
Ran in:
T_stop=10;
T_sample = 0.002;
x0 = [0;0;1/2*pi;0];
options=odeset('RelTol',1.0e-6,'AbsTol',1.0e-6,'BDF','on');
[t,x]=ode45(@(t,x) RIP_Sysm(t,x),[0:T_sample:T_stop],x0,options); % ode45解常微分方程
figure(1)
plot(t,x(:,1));title('时间-滑块A角度');
xlabel('t[s]');ylabel('\theta_A[rad]')
figure(2)
plot(t,x(:,3));title('时间-滑块D角度');
xlabel('t[s]');ylabel('\theta_D[rad]')
function dx = RIP_Sysm(t,x)
%% Constants
ml = 15;
Rp = 42.31;
dl = 127;
H0 = 124.8;
R = 124.24;
L = 147.72;
d = 9.4;
alfa = 12.83*pi/180;
Ix = 1000;
Iy = 1000;
Iz = 1000;
J = 10;
A = (dl^2 + H0^2 + Rp^2 + R^2 - L^2 - 2 * dl * R * sin((x(1) - x(3))/2)) / (2 * Rp);
B = (R^2 * (cos((x(1) - x(3))/2))^2 + H0^2)^0.5;
C = R * cos((x(1) - x(3)) / 2);
b = real(acos( C ./ B ) + alfa - acos( A ./ B ));
a = (x(1) - x(3)) / 2;
db_A = (b-x(1));
db_D = (b-x(3));
da_A = (a-x(1));
da_D = (a-x(3));
dx = [db_A;db_D; da_A;da_D];
end
  3 个评论
显示 1更早的评论
晨名
晨名 2023-4-12
Thank you very much for your answer! But in this case, I want to use the 'diff ()' to take the partial derivative.

请先登录，再进行评论。

Walter Roberson
Walter Roberson 2023-4-12
There are two major diff() functions.
You thought you were using calculus derivative, diff . However, that diff() function only applies if at least one of the parameters passed to diff() is symbolic or symfun
The diff() that applies in most cases where parameters are not symbolic, is diff which is approximately diff(x) = x(2:end) - x(1:end) . When you use that diff() function, a non-empty second parameter must be a positive integer scalar indicating the number of times that the subtraction operator is to be repeated.
The values you are passing in to diff() are purely numeric, so you are getting the successive-differences version of diff()
I suggest that you rewrite your code to create your equations using the Symbolic Toolbox, and then you follow the workflow shown in first example for odeFunction in order to generate a function handle that can be used with ode45()

类别

在 Help Center 和 File Exchange 中查找有关 Logical 的更多信息

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by