implementation of the HIL test on a new target.

Question

Zineb 2023-4-17

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1948488-implementation-of-the-hil-test-on-a-new-target

评论： Zineb 2023-5-3

I have the following source files (rtiostream_tcpip.c, ext_srv.c, rtiostream_interface.c) and I need to perform HIL testing on a new target. I am wondering if there is a manual or guide available that explains how to start from there. If so, could you please provide me with a link or send me a copy of the manual by email?

Thank you in advance for your help. If you need any further information from me, please do not hesitate to contact me.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Dimitri MANKOV 2023-5-1

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1948488-implementation-of-the-hil-test-on-a-new-target#answer_1226479

Hi Zineb,

I'm assuming you have the following files in mind, is that correct?

Create a Transport Layer for TCP/IP or Serial External Mode Communication

Are you using a Simulink Real-Time / Speedgoat target machine? If so, you can disregard this specific example, and use the following example model instead to setup a TCP/IP communication channel on your target machine.

I hope this is helpful!

Dimitri

2 个评论
显示无隐藏无

Zineb 2023-5-3

No i'm not using Speedgoat target machine.

Zineb 2023-5-3

The target hardware is a custom embedded computer already running matlab generated code, and we would like to modify our existing software, to be able to run HIL with Simulink on the generated code.

请先登录，再进行评论。