清空筛选条件
清空筛选条件

Subplot output data seen in two different window.

1 次查看（过去 30 天）
ulas can ozak
ulas can ozak 2023-5-7
评论： ulas can ozak 2023-5-7
How can i put these figures in same window?
clear all;
close all;
clc;
f=40;
v=380;
p=2;
r_1=0.31; x_1=0.5; r_2=0.155; x_2=0.25; x_m=12.5;
w_e=(f/p)*60;
v1=v/sqrt(3);
s=0:0.01:1;
for i=1:length(s)
W_r(i) = (1-s(i))*w_e
Z_in(i) = r_1 + x_1*1i + 1/(x_m*1i) + 1/( x_2*1i + r_2/s(i) )
i_1(i) = v1 / Z_in(i)
i_1_f(i) = abs(i_1(i))
pf(i) = cos( angle( i_1(i) ) )
i_2(i) = ( v1 - i_1(i) * (r_1 + x_1*1i) ) / (x_2*1i +( r_2/s(i) ) );
i_2_f(i) = abs(i_2(i));
i_m(i) = ( v1 - i_1(i) * ( r_1 + x_1*1i ) ) / ( x_m*1i );
T_m(i) = ( 3/w_e ) * ( r_2/s(i) ) * i_2_f(i)^2
P_in(i) = sqrt(3) * v * i_1_f(i) * cos( angle( i_1(i) ) )
P_out(i) = 3 * ( r_2/s(i) ) * ( 1-s(i) ) * i_2_f(i)^2
verim(i)= P_out(i) / P_in(i)
end;
for u=1:length(s)
W_ry(u) = (1-s(u))*w_e;
Z_iny(u) = (x_1 + x_2)*1i + r_2/s(u);
iy(u) = v1 / Z_iny(u);
i_f(u) = abs(iy(u));
pfy(u) = cos( angle( iy(u) ) );
T_my(u) = ( 3/w_e ) * ( r_2/s(u) ) * i_f(u)^2;
P_iny(u) = sqrt(3) * v * i_f(u) * cos( angle( iy(u) ) );
P_outy(u) = 3 * ( r_2/s(u) ) * ( 1-s(u) ) * i_f(u)^2;
verimy(u)= P_outy(u) / P_iny(u);
end;
subplot(4,2,1);
plot(W_r,T_m); grid; title('Moment-Hız (T- Eşdeğer Devre)');
xlabel('W_r'); ylabel('T_m');
subplot(4,2,2);
plot(W_r,i_1_f); grid; title('Stator Akımı-Hız(T- Eşdeğer Devre)');
xlabel('W_r'); ylabel('I_1'); legend('Stator Akımı','Location','SouthWest');
subplot(4,2,3);
plot(W_r,P_out); grid; title('cıkıs Gücü-Hız (T- Eşdeğer Devre)');
xlabel('W_r'); ylabel('P_out'); legend('P_out','Location','NorthWest');
subplot(4,2,4);
plot(W_r,verim); grid; title('Verim-Hız (T- Eşdeğer Devre)');
xlabel('W_r'); ylabel('Verim');
subplot(4,2,5);
plot(W_ry,T_my); grid; title('Moment-Hız (Yaklaşık Eşdeğer Devre)');
xlabel('W_r'); ylabel('T_m');
subplot(4,2,6);
plot(W_ry,i_f); grid; title('Stator Akımı-Hız (Yaklaşık Eşdeğer Devre)');
xlabel('W_r'); ylabel('I'); figure;
subplot(4,2,7);
plot(W_ry,P_outy); grid; title('cıkıs Gücü-Hız (Yaklaşık Eşdeğer Devre)');
xlabel('W_r'); ylabel('P_out'); legend('P_out','Location','NorthWest');
subplot(4,2,8);
plot(W_ry,verimy); grid; title('Verim-Hız (Yaklaşık Eşdeğer Devre)');
xlabel('W_r'); ylabel('Verim');

请先登录，再回答此问题。

回答（2 个）

Cris LaPierre
Cris LaPierre 2023-5-7
Remove the figure command from your code here:
plot(W_ry,i_f); grid; title('Stator Akımı-Hız (Yaklaşık Eşdeğer Devre)');
xlabel('W_r'); ylabel('I'); figure; % <---------------- Here
subplot(4,2,7);
the cyclist
the cyclist 2023-5-7
On this line of your code
xlabel('W_r'); ylabel('I'); figure;
the figure command is creating a new figure window. Don't call that figure command.

类别

在 Help Center 和 File Exchange 中查找有关 Data Import and Analysis 的更多信息

标签

产品


版本

R2018a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by