I have a question about the connection of PV arrays in series and how it works
6 次查看(过去 30 天)
显示 更早的评论
The problem is that, when I connect two PV arrays in series with both 10 modules and the same data like in the picture it doesn't work, but when I use one pv array with 20 modules it works. I don't get why this does not work, because I want to work with partial shading. The problem is that the simulation starts, but immediately stops.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1386554/image.jpeg)
0 个评论
回答(1 个)
Kothuri
2024-2-15
I understand that the simulation stops immediately when two PV arrays with 10 modules each are connected in series. But when I ran the simulation by connecting two PV arrays with 10 modules each in series connected to a resistive load, the simulation ran successfully.
I tried to reproduce the error, but I was not able to as the details of solver and the load was not provided, but if you still get error after following mentioned workflow, share these details.
I am attaching the snapshots of the Simulink model which I have tried and its output.
You may refer the below link which shows a Simulink example on Partial Shading of a PV Module.
0 个评论
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Magnetic Elements 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!