Extract segments from signal

Question

Samuel 2023-5-24

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1972284-extract-segments-from-signal

评论： Daniel 2023-5-25

采纳的回答： Daniel

Hi,

I have a signal in form of a 6608x1 double and I'd like to extract segments from that signal.

I want to extract every segment of the signal where the signal drops by at least 3% compared to the prior max value. Also, the segments are only valid if the duration is at least 150 seconds. As soon as the signal goes up again, the segment is over. I want to store these segments in a seperate array, so I can plot these segments on top of the signal to highlight where the signal drops by at least 3% for at least 150 seconds.

Can someone help me define the criteria for this task in Matlab? I'm not quite sure how to approach this.

This is a drawing of how I would like this to look when I plot the segments on top of the signal.

Thanks in advance!

4 个评论
显示 2更早的评论隐藏 2更早的评论

Daniel 2023-5-24

What do you mean by "prior max value"? How is the prior max defined?

Samuel 2023-5-24

The last value before the signal drops. And everytime the signal goes up again, it reaches a new max before it drops again. I'm looking for a drop by at least 3% between the lowest point of the current drop and the last max value before the drop began.

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Daniel 2023-5-24

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1972284-extract-segments-from-signal#answer_1243734

在 MATLAB Online 中打开

As a caution, I'm not at all sure that this is the most efficient way to do what you're asking. That said, it looks like you want to do a couple of things:

Identify 3% drops.
Identify 3% rises.
Identify drop-to-rise runs.
Filter these runs based on length.

At some point you'll also need to associate time values with your data. You can do this by creating a time vector, such as

t=(0:length(signal-1))'*Ts;

Based on your plot, it looks like you're taking samples once a second, so Ts would be 1.

To identify drops, you'll need to take the difference and compare it to the former value. You can take the difference with the diff function.

signal_difference = [diff(signal);0]; % I'm adding an element so sigdiff has the same size as signal
signal_ratio = signal_difference./signal; % Element-wise normalization gives you the relative differences

Then you'll want to identify falling and rising edges by comparing signal_ratio to 0.03 or -0.03. (By the way, your provided signal data contains no 3% drops or rises.)

Next, you'll have to iterate over the drops and rises to collect them. You'll often see multiple drops before a single rise, or multiple rises before a single drop. So you'll need to write some sort of state machine to pair them, looking for a drop and then looking for a rise and so on. If you store the index associated with each qualified drop and each qualified rise, that will allow you to extract the signal data, and also give you the run length for each run. I'm not aware of anything prefabricated that does this automatically.

Finally, scan that list of indices and reject any run length less than your desired time.

If you run into problems doing that, we can provide more targeted advice. If anyone else has a better or more clever idea for how to do this I'd be interested to hear.

2 个评论
显示无隐藏无

Samuel 2023-5-24

Thanks for your input. I've come up with another idea.

I've used the findpeaks() function to get every local max and min. Now my task is to identify which neighbouring min and max are at least 3% apart in Y values and at least 150 seconds apart in X values. But I'm only interested in the 3% drops. Not the rises.

Daniel 2023-5-25

在 MATLAB Online 中打开

Whoops, I misunderstood as far as rises, sorry!

Neither of the qualification tasks should be too hard, I think.

For the 3% difference, find the first min after each max, divide the min by the max, compare to threshold.

For the 150 seconds apart, find the first min after each max, compute the difference in sample indices (therefore in sample times once you multiply by your sampling period Ts), compare to threshold.

Keep any region that passes both tests.

The only remaining divergence: If you use the output of findpeaks as is, you'll get a run going from the max value itself to the min. From the plot in your original post, it looks like you want to exclude the max itself, and only include values below the max. Luca has a nice intuitive solution for that, scanning through the signal until the signal falls below the observed max. If you want to be more obfuscated, you could do something like the "Code to find the latest-occurring peak value" below.

% Extra code to generate a waveform to test

x = repmat(rand(1,20),5,1); x = reshape(x,1,[])';

% Code to find the latest-occurring peak value

[p,peakIdxsFlipped] = findpeaks(x(end:-1:1));

peakIdxs = length(x) + 1 - peakIdxsFlipped(end:-1:1);

% Extra code to plot the results

plot(x); hold on; plot(peakIdxs,x(peakIdxs),'o')

请先登录，再进行评论。

Answer 2

Luca Ferro 2023-5-24

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1972284-extract-segments-from-signal#answer_1243759

编辑：Luca Ferro 2023-5-24

在 MATLAB Online 中打开

This is the closest i could go as of right now, i'll revise it in the next days. But i'll share it so that someone else can build on it to reach the final solution.

Basically what it does is analyzing the signal flat section per flat section.

flat=diff(signal);

[peaks ,peaksIdx]=findpeaks(signal); %find peaks

highlight=nan(size(signal,1),1);

peaksIdx=[peaksIdx ; inf];

for pp=1:size(peaks,1)-1 %loopsthrough each peak

ss=peaksIdx(pp);

peakLen=1;

startPeak=ss;

while ss<peaksIdx(pp+1) && signal(ss)==peaks(pp) && flat(ss)==0

peakLen=peakLen+1;

ss=ss+1;

end %detects peak and moves to the end of it

while flat(ss)~=0 && ss<peaksIdx(pp+1)

ss=ss+1;

end %moves to the next flat area

while ss<peaksIdx(pp+1) && flat(ss)==0

startFlat=ss;

flatLen=1;

if signal(ss)/peaks(pp) > 0.3

flatLen=flatLen+1;

end

highlight(startFlat:startFlat+flatLen-1)=signal(startFlat:startFlat+flatLen-1);

ss=ss+1;

end %if the flat area has the proper specifics highlights it

end

plot(signal,'color','blue');

hold on

plot(highlight,'color','red','LineWidth',3)

The issue that this has is that it only highlights the first drop and not the following ones.

Disclaimer: is not the best approach, is not the cleanest code. I'll revise the abuse of loops later to find a better structure.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。