Spring motion without extension in Simscape

Question

Vinayak 2023-7-13

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1995298-spring-motion-without-extension-in-simscape

回答： Supraja 2023-7-26

I am attaching a spring to single acing cyclinder which convert hydraulic power to translational motion. Cylinder piston is later connected to a mechanical spring and ultimately to mechanical reference in series. I want to model spring such that for initial certain movement of piston for specific distance. Is there any alternative to hardstop in simscape. Facing errors with hardstop for kinds of model I am trying to build.

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Supraja 2023-7-26

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/1995298-spring-motion-without-extension-in-simscape#answer_1279087

I understand that you want to convert hydraulic power to translational motion in Simscape.

Have a look at this model which is similar to your requirements:https://www.mathworks.com/matlabcentral/fileexchange/38259-simple-hydraulic-system2?s_tid=srchtitle_support_results_1_attaching%20spring%20to%20cylinder%20in%20simscape

You can also use “Wheel and Axle” and “Rack & Pinion” for converting to translational motion. The documentation links are attached below:

Wheel and Axle:https://www.mathworks.com/help/simscape/ref/wheelandaxle.html

Rack & Pinion:https://www.mathworks.com/help/sdl/ref/rackpinion.html

Hope this helps!