i have a transfer function and pI values, i want to draw a bode plot by using transfer function and PI values

Question

Nagesh Guguloth 2023-8-4

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2004762-i-have-a-transfer-function-and-pi-values-i-want-to-draw-a-bode-plot-by-using-transfer-function-and

回答： Vandit 2023-8-23

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Jon 2023-8-4

What have you tried so far? What problems are you having? Have you looked at the documentation https://www.mathworks.com/help/ident/ref/dynamicsystem.bode.html (or type doc bode on the command line)

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Vandit 2023-8-23

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2004762-i-have-a-transfer-function-and-pi-values-i-want-to-draw-a-bode-plot-by-using-transfer-function-and#answer_1291842

在 MATLAB Online 中打开

Bode_output.png

Hi,

To draw a Bode plot using a transfer function and proportional-integral (PI) values in MATLAB, you can follow these steps:

Define your transfer function using the ‘tf’ function by specifying its numerator and denominator coefficients or by providing the poles and zeros.
Create a 'tf' object for the PI controller using the PI values and
Multiply the transfer function of the plant with the transfer function of the PI controller to obtain the overall transfer function of the closed-loop system.
Use the 'bode' function to plot the Bode magnitude and phase response of the closed-loop system.

Below is the example code snippet to draw a bode plot:

% Define the transfer function of the plant
numerator = [1];  % Numerator coefficients
denominator = [1, 2, 1];  % Denominator coefficients
plant_tf = tf(numerator, denominator);
% Define the PI controller transfer function
Kp = 1;  % Proportional gain
Ki = 0.5;  % Integral gain
pi_tf = tf([Kp, Ki], [1, 0]);
% Compute the overall transfer function of the closed-loop system
closed_loop_tf = plant_tf * pi_tf;
% Plot the Bode magnitude and phase response
bode(closed_loop_tf);