It seems to me that the configuration has to be done via the Frontend Side Filter and Antenna Switches of the E310. Is this feature supported in the HW/SW co-design workflow?
Mapping of target platform interfaces in HW/SW Co-Design Workflow to physical ports on Ettus E310
2 次查看(过去 30 天)
显示 更早的评论
I am using the HW/SW co-design workflow to create an application on the SDR Ettus E310. To get started, I follow the tutorial Target QPSK Transmitter and Receiver to USRP E3xx Using HW/SW Co-Design Workflow.
As described there, I configured the baseband channels to TX1 and RX1 in step 1.3 Set Target Interface. This seems to result in an output on the physical pin TRX-B. Unfortunately, I could not find any description of the assignment of the logical ports in the HW/SW co-design workflow to the physical outputs of the E310 hardware. How do I configure the Target Platform Interfaces and the E3xx Transmitter/Receiver to use TRX-A as output and RX2-A as input?
Many thanks in advance for any assistance.
回答(1 个)
Ganapathi Subramanian
2023-8-30
Hi Sebastian,
It is my understanding that you are working on HW/SW co-design workflow and wants to know about how to configure the Target Platform Interfaces and the E3xx Transmitter/Receiver. As of now, we don’t have the feature to map with physical switches and LED for E310.
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Communications Toolbox 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!