Simulation of an earth fault with the aid of an earth fault quenching coil

6 次查看（过去 30 天）
Rene Schwitte
Rene Schwitte 2023-8-29
编辑： Rene Schwitte 2023-9-6
Hello all,
I would like to simulate an earth fault in a 10.5kV network. To do this, I have built a system and calculated and set all the parameters. The system consists of a source (30kV), transformer (30/10.5kV), medium voltage cable (100 metres), earth fault suppression coil and a block that simulates the fault. I want to simulate overcompensation. I have done this so far, but I am not satisfied with the results and I am not sure if the values are correct. Has anyone simulated the same thing before and can answer some questions about it or provide me with a file?
Many thanks
With kind regards
Rene
  2 个评论
Ayush Anand
Ayush Anand 2023-9-4
Hi Rene,
Could you share your code or explain your question in more detail so I can replicate it on my end?
Rene Schwitte
Rene Schwitte 2023-9-6
编辑：Rene Schwitte 2023-9-6
Hello @Ayush Anand,
Thank you very much for your answer. Unfortunately I don't have a Matlab code, but a simulation in Simulink. I will explain my idea briefly and upload my simulation program tonight.
Situation:
As I have often heard that earth faults on the undervoltage side of the transformer have caused enormous damage, I would like to simulate this situation. For this purpose, I would like to build a system consisting of a transformer and an earth fault suppression coil, which also extends the short outgoing line of the transformer. The transformer is to be fed from a high-voltage network, which I have represented as a slack. In this setup, I now want to simulate an earth fault and see why the large damage occurred. Overvoltage, transient range, tipping oscillation, etc. The only problem is that I am not sure whether I have calculated the values for the individual equipment correctly and whether I can trust my values from the scope. I will upload my simulation here tonight and would be happy if you take a look at it and give me your opinion. Regarding the values and the level of detail of the model
Simulation values:
Mains: 110kV
Transformer: 110/10 kV; 40 MVA; short-circuit peak 12.6%; short-circuit losses: 144478W; no-load losses: 14741W
Earth fault quenching coil: 90A
Short cable: 4*3*4*630 NA2XS2Y (0.1167 Ω/km; 0.33 mH/km; 0.64 μF/km 20m).
Voltage transformer: 10 000/100 V. Unfortunately, no idea how to do this.

请先登录，再进行评论。

请先登录，再回答此问题。

回答（0 个）

类别

在 Help Center 和 File Exchange 中查找有关 Earth and Planetary Science 的更多信息

标签

产品


版本

R2023a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by