Advice on decreasing Simulation time for model "mcb_inverter_powerloss.slx"

Question

Jacob 2023-9-7

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2018031-advice-on-decreasing-simulation-time-for-model-mcb_inverter_powerloss-slx

评论： Jacob 2023-9-11

Hello Community,

I have duplicated and modified "mcb_inverter_powerloss.slx" simulink project to include our motor and custom inverter specs. In the original model there is only one fet in parallel. In our hardware, we have 3 in parallel. On simulating with 1 fets in parallel,it takes about 30 mins to complete. With 3 in parallel, it takes considerable time to go through each of the modulation scheme. Are there any advice on simulating this model with multiple fets in parallel?

If there isn't anything that can be done on the matlab software side. Will having better cpu improve simulation time of this model?

Regards

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

KrishnaKumar 2023-9-11

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2018031-advice-on-decreasing-simulation-time-for-model-mcb_inverter_powerloss-slx#answer_1306976

编辑：KrishnaKumar 2023-9-11

Hi Jacob,

I understand that you are referring to this example - Determine Power Losses and THD for PWM Methods - MATLAB & Simulink Example (mathworks.com).

The model uses Simscape elements for computing power losses and THD in an Inverter + Motor system and usually such models are time consuming. You can take a look at Setting Up Solvers for Physical Models - MATLAB & Simulink (mathworks.com) or any other material on Simscape modelling to help you in achieving better simulation time.

Alternately, depending on your goal, if you only wish to look at power losses, then commenting out the THD computation (or vice versa) could help with improving simulation time. You could also look at using an equivalent single FET/MOSFET instead of 3 in parallel to improve simulation time.