Could not open VISA object via eternet

Question

Louis Tomczyk 2023-10-4

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2029149-could-not-open-visa-object-via-eternet

回答： Adeline 2023-10-10

采纳的回答： Adeline

在 MATLAB Online 中打开

Dear all,

First I am totally a dummy in interfaces and communication between devices.

I have an oscilloscope Tektronix DP077002SX connected via Ethernet @Lan1 port at the back of the machine.

The call to VISA function seem to work.

>> tmp=visa('ni','TCPIP0::192.168.0.66::INSTR')
VISA-TCPIP Object Using NI Adaptor : VISA-TCPIP-0-192.168.0.66-inst0
Communication Address 
RemoteHost:         192.168.0.66
Communication State 
Status:             closed
RecordStatus:       off
Read/Write State  
TransferStatus:     idle
BytesAvailable:     0
ValuesReceived:     0
ValuesSent:         0

but it crashes when I try to open it with FOPEN:

Error using icinterface/fopen (line 83)
Unsuccessful open: Could not open VISA object. Use INSTRHWINFO for a list of available configurations.

So I did typed the suggested command and get:

>> instrhwinfo
ans = 
HardwareInfo with properties:
MATLABVersion: '9.5 (R2018b)'
SupportedInterfaces: {'gpib'  'serial'  'tcpip'  'udp'  'visa'  'Bluetooth'  'i2c'  'spi'  'modbus'}
SupportedDrivers: {'matlab'  'ivi'  'vxipnp'}
ToolboxName: 'Instrument Control Toolbox'
ToolboxVersion: '3.14 (R2018b)'

But now I don't know what to do at all.

Any ideas of how debugging?

Thanks in advance,

best

p.s.

MATLAB Version: 9.5.0.944444 (R2018b)
MATLAB License Number: 40713398
Operating System: Microsoft Windows 10 Pro Version 10.0 (Build 19045)
Java Version: Java 1.8.0_152-b16 with Oracle Corporation Java HotSpot(TM) 64-Bit Server VM mixed mode

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Adeline 2023-10-10

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2029149-could-not-open-visa-object-via-eternet#answer_1329749

Hi,

I understand you are trying to connect a Tektronix DP077002SX oscilloscope in MATLAB via Ethernet.

The error using “fopen” can be a result of missing object configuration or mismatched driver assignment. Please try the following solutions to resolve the issue:

Ensure that only one interface object is given to the instrument and configure all the required properties for the specific object. Refer to the following link for more information: https://www.mathworks.com/help/instrument/fopen.html#f10-363666
Check if Windows has assigned the correct driver to the instrument. If an incorrect driver is assigned, try reassociating the ethernet adapter with the required driver. The National Instruments website provides a procedure for reassociating a USB device with the required NI-VISA driver. Refer to the following link for the procedure and adapt it for an Ethernet connection: https://knowledge.ni.com/KnowledgeArticleDetails?id=kA00Z0000019La2SAE&l=en-IN
Try using the “tmtool” to connect MATLAB with the oscilloscope. Refer to the following link for a demonstration of connecting Tektronix instruments to MATLAB: https://www.mathworks.com/videos/connecting-tektronix-instruments-to-matlab-68778.html