why the angular position of bar2 is negative?

Question

OUCHEN 2023-10-10

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2031644-why-the-angular-position-of-bar2-is-negative

回答： Vinay 2024-9-20

In the four bar linkage, I do not understand why the angular position of bar 2 is negative. I attached the matlab figures showing the positions of the 4 joints as well as the simscape model of the four bar linkage. I also need to understand why the position of the motor joint is linear. I expected it to be periodic (after achieving a cycle of 2pi, it will restart from zero).

Thanks in advance

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Vinay 2024-9-20

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2031644-why-the-angular-position-of-bar2-is-negative#answer_1519975

Hi Ouchen,

The angular position of the second bar linkage is negative due to the opposite connection of the base frame and the follower frame.

The position is not periodic due to the fixed linear position of the first “revolute joint”,causing the linear motion of the successor joints in the linkage.

Kindly refer to the below Simulink example of “4-bar linkage” for more details:

https://www.mathworks.com/help/sm/ug/prescribe-joint-motion-in-four-bar-model.html