I have a live script (.mlx file) that plots 2 cycles of a pulse train that has frequency and duty cycle as inputs. For some frequencies it is almost as if some of the interim points are not plotted, and instead only straight line between the end points are. However, the "intermediate" points are all there in the arrays I'm ploting, and in fact, when I pop the plot out, it the plot displays correctly. So, it appears to be a rendering issue within Live Script....
This is what I see in Live Script:
and this is what I get when I pop the plot out: (the correct waveform):
Here is my script to see if anyone can recreate what I´m seeing in Live Editor vs. "Matlab". It renders correctly on here as shown below (note: the plot below is full plot while above I only showed the first waveform plotted on the axis.)
t2 = linspace(0,toff,100);
hi = repmat(A,1,size(t1,2));
lo = repmat(0,1,size(t2,2));
timetot= [time time(end)+time];
ylabel('amplitude (volts)')
title([{'Resulting Ave Value and';'Ripple as Function of DC and Freq'}])
x1 = A*(exp(-D.*T/tau)-1).*exp(T.*(D-1)/tau)./(-1+exp(-T/tau));
x2 = (exp(-D.*T/tau)-1)*A./(-1+exp(-T/tau));
plot(0,x1,'*k',t1,x1+(A-x1)*(1-exp(-t1/tau)),'-r')
plot(ton,x2,'*k',ton+t2,x2*exp(-t2/tau),'-r')
plot(T,x1,'*k',T+t1,x1+(A-x1)*(1-exp(-t1/tau)),'-r')
plot(T+ton,x2,'*k',T+ton+t2,x2*exp(-t2/tau),'-r')
Ripple = (x2 - x1)./(A*D);
rip = sprintf('Ripple = %2.2f %%',Ripple*100);
Ave = sprintf('Average Amplitude = %2.2f volts', Amplitude);
disp(Ave)
Average Amplitude = 2.50 volts
