fmincon does not respect MaxIter

Question

Mohammad Shojaei Arani 2023-11-18

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2049007-fmincon-does-not-respect-maxiter

评论： Mohammad Shojaei Arani 2023-11-19

采纳的回答： Matt J

在 MATLAB Online 中打开

Hello,

I do not understand why fmincon does not respect the maximum number of iteration I specify and does whatever it

l;ikes to do. My cod is very long to show you but I show the main part which I believe is enough:

Max_iter=solver{2};
par0=lb+(ub-lb).*rand(1,dim);
options=optimoptions('fmincon','MaxFunEvals',realmax,'MaxIterations',Max_iter,'OutputFcn',@(x,A,state)myoutput_fmincon_Spline(x,A,state));
problem = createOptimProblem('fmincon','objective',cost,'x0',par0,'lb',lb,'ub',ub,'options',options);
ms=MultiStart('UseParallel',UseParallel);
myCluster=parcluster('local');NumWorkers=myCluster.NumWorkers;
[EstimatedNoise_par, f_best]=run(ms,problem,NumWorkers);

I try Max_tier = 1 and I expect the code to stop fast but fminbcon ignore it.

Any idea?

Thanks in advance,

Babak

8 个评论
显示 6更早的评论隐藏 6更早的评论

Mohammad Shojaei Arani 2023-11-18

Hi Walter,

Thanks.

My dim is 8. So, it means that even if I set MaxIter=1 fmincon still considers 9 iterations. But, still I expect my code to end rather fast. I tested my code with MaxIter=1. And, I set Useparalel = false. I noticed that the solutions alternate between Iteration =0 and Iteration =1 quite a lot. But, I expect an increasing pattern. Below you will see part of the solutions I get in the command window (I believe you do not need to know the details of my code):

Iteration : 0

Estimated parameters of diffusion function : 0.340694 24.7095 11.5061 10.303 12.1326 25.8397 20.2418 28.2327

Objective function value (negative sum of log-likelihoods) : 22775715.025

Iteration : 1

Estimated parameters of diffusion function : 1.21214 24.3313 11.6899 10.4399 12.2596 25.8293 20.0435 28.0639

Objective function value (negative sum of log-likelihoods) : 21561496.9938

Iteration : 1

Estimated parameters of diffusion function : 1.21214 24.3313 11.6899 10.4399 12.2596 25.8293 20.0435 28.0639

Objective function value (negative sum of log-likelihoods) : 21561496.9938

Iteration : 0

Estimated parameters of diffusion function : 13.4131 29.2669 12.1729 20.2488 5.63615 13.5646 27.3545 28.6846

Objective function value (negative sum of log-likelihoods) : 25489598.6602

Iteration : 0

Estimated parameters of diffusion function : 13.4131 29.2669 12.1729 20.2488 5.63615 13.5646 27.3545 28.6846

Objective function value (negative sum of log-likelihoods) : 25489598.6602

Iteration : 1

Estimated parameters of diffusion function : 14.4645 14.7116 13.6338 18.3257 9.41868 14.7275 21.5547 22.3799

Objective function value (negative sum of log-likelihoods) : 19816903.2732

Iteration : 1

Estimated parameters of diffusion function : 14.4645 14.7116 13.6338 18.3257 9.41868 14.7275 21.5547 22.3799

Objective function value (negative sum of log-likelihoods) : 19816903.2732

Do you know why?

Mohammad Shojaei Arani 2023-11-18

移动：Torsten 2023-11-18

Thanks Walter,

I wish I can ask a short question. Aparently, it is really difficult to stop fmincon (I really tried har). I used the global optimization aspect of fmincon as bellow:

par0=lb+(ub-lb).*rand(1,dim);

gs=GlobalSearch; options=optimoptions('fmincon','MaxIterations',40,'OutputFcn',@(x,A,state)myoutput_fmincon_Spline(x,A,state)); problem=createOptimProblem('fmincon','x0',par0,'objective',cost,'lb',lb,'ub',ub,'options',options);

[EstimatedNoise_par, f_best]=run(gs,problem);

As you see below I set the MaxIter to 40. However, I get a very nice answer at iteration 26:

Iteration : 25

Estimated parameters of diffusion function : 9.3973 12.3577 17.1114 20.2589 21.4486 19.3357 11.637 6.14941

Objective function value (negative sum of log-likelihoods) : 16701379.7463

Iteration : 26

Estimated parameters of diffusion function : 9.39729 12.3577 17.1114 20.2588 21.4486 19.3357 11.6371 6.14942

Objective function value (negative sum of log-likelihoods) : 16701379.7463

Iteration : 27

Estimated parameters of diffusion function : 9.39729 12.3577 17.1114 20.2588 21.4486 19.3357 11.6371 6.14942

Objective function value (negative sum of log-likelihoods) : 16701379.7463

Iteration : 28

Estimated parameters of diffusion function : 9.39729 12.3577 17.1114 20.2588 21.4486 19.3357 11.6371 6.14942

Objective function value (negative sum of log-likelihoods) : 16701379.7463

Is there a brute force way to just stop it? I also tried TolX=0.01, but again it does not stop. I do not know what to do with this.

Mohammad Shojaei Arani 2023-11-18

Hi Torsten,

You know, I ma making a MATLAB package now. If it was for my personal use then I would not bother you. I need to publish this package. The package also has a tutorial. It is not really nice to write in the tutorial "stop it whenever you see that the solution does not improve". Furthermore, in my package a user can choose not to see the results in the command window. So, I AM SEEKING A WAY TO STOP THE CODE WITHOUT PRESSING THE Ctrl+C

Walter Roberson 2023-11-18

outputfcn returns a value. That value can directly signal stop (that is, it is a fundamental part of the design, easily done, not something obscure)

So your outputfcn could evaluate the solution at hand and somehow decide that it is good enough.

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Matt J 2023-11-18

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2049007-fmincon-does-not-respect-maxiter#answer_1355692

编辑：Matt J 2023-11-18

在 MATLAB Online 中打开

Now you see that from iteration 26 the solution is really good with 4-5 digits of accuracy, so whay TolX=0.01 fails?

Remember that MultiStart is an outer function deploying many instances of fmincon. Each instance of fmincon has its own inner iteration sequence. The values you've set using optimoptions (e.g.TolX, MaxIter) are used by each instance of fmincon to decide when its inner iteration sequence will stop. They do not control the outer level deployments of MultiStart.

If you want to define your own stopping criterion for the outer sequence of deployments, you must define a separate OuputFcn for that and pass it to MultiStart directly, e.g.,

ms=MultiStart('UseParallel',UseParallel,'OutputFcn', @stopMultiStart);

See here, for an example:

https://www.mathworks.com/help/gads/output-functions-for-globalsearch-and-multistart.html#bsk8qvj

3 个评论
显示 1更早的评论隐藏 1更早的评论

Matt J 2023-11-19

The same remarks apply. You are passing in stopping criteria that govern the inner iterations of fmincon, but not the outer iterations of GlobalSearch.

Mohammad Shojaei Arani 2023-11-19

OK. Thanks Matt!

请先登录，再进行评论。

fmincon does not respect MaxIter

8 个评论
显示 6更早的评论隐藏 6更早的评论

采纳的回答

3 个评论
显示 1更早的评论隐藏 1更早的评论

更多回答（0 个）

另请参阅

类别

标签

Community Treasure Hunt

fmincon does not respect MaxIter

8 个评论 显示 6更早的评论隐藏 6更早的评论

采纳的回答

3 个评论 显示 1更早的评论隐藏 1更早的评论

更多回答（0 个）

另请参阅

类别

标签

Community Treasure Hunt

8 个评论
显示 6更早的评论隐藏 6更早的评论

3 个评论
显示 1更早的评论隐藏 1更早的评论