How to edit the Rx filter parameters in WLAN Toolbox in a given example.

2 次查看（过去 30 天）
MD ABDUL
MD ABDUL 2023-11-20
回答： Garmit Pant 2024-1-9
I am working on the example named as "802.11ax Multinode System-Level Simulation of Residential Scenario". The link is
https://se.mathworks.com/help/wlan/ug/802-11ax-multinode-system-level-simulation-of-residential-scenario-using-matlab.html
I would like to change the RX flter coeffiecient.
So far, I have known that this example does not deal with adjacent channel interference. If I want to include adjacent channel interference with the filter specifications, how can I do that?
Please help me on this regard.

请先登录，再回答此问题。

回答（2 个）

Sachin Lodhi
Sachin Lodhi 2024-1-8
Hello MD ABDUL,
Check out this documentation which covers what you are aiming to do, except it focuses on ‘5G’. It details how to simulate and evaluate the effects of RF impairments on an IEEE 802.11ax signal that's dealing with adjacent 5G interference: https://www.mathworks.com/help/wlan/ug/modeling-and-testing-an-802-11ax-rf-receiver-with-5g-interference.html#d126e23568
You can modify your model in a similar way to add the capabilities you need. For further insight, I kindly suggest reviewing a model that demonstrates the simulation of Adjacent and Co-Channel Interference in a PSK modulated signal, which can be found at the following link: https://www.mathworks.com/help/comm/ug/adjacent-and-co-channel-interference.html
Hope this helps.
Best Regards,
Sachin
Garmit Pant
Garmit Pant 2024-1-9
Hello Abdul,
I understand that you are working on the MATLAB example “802.11ax Multinode System-Level Simulation of Residential Scenario” and want to include adjacent filter interference in the scenario given in the example and thus are looking for a method to change the RX filter coefficients.
The example that you are working on simulates a residential scenario to model the performance of an “IEEE® 802.11ax™” network using MATLAB’s WLAN Toolbox and the Communications Toolbox Wireless Network Simulation Library. The WLAN network is formulated using “wlanNode” objects. You cannot include adjacent channel interference in the given simulation since the WLAN Toolbox supports only full-band co-channel interference modelling. It does not support modelling overlapping and adjacent channel interference. Thus, it is not possible to introduce adjacent channel interference by altering the RX filter coefficients.
For further understanding on WLAN Toolbox, you can refer to the following MATLAB Documentation:
  1. Refer to ‘More About’ section of the “wlanNode” documentation to understand the assumptions and limitations of the modelling methods- https://www.mathworks.com/help/wlan/ref/wlannode.html#mw_1c86cdad-58b8-4f15-a71a-35fab1ff9255
I hope you find the above explanation and suggestions useful!

类别

在 Help Center 和 File Exchange 中查找有关 System-Level Simulation 的更多信息

标签

产品


版本

R2023b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by