i can't see the data updating in thingspeak but only 1 field can be update in thingspeak and other 3 or not updationg only once it has been update 4 fields. In serialmonitor s

Question

Rishivardhan 2023-12-4

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2056189-i-can-t-see-the-data-updating-in-thingspeak-but-only-1-field-can-be-update-in-thingspeak-and-other-3

评论： Rishivardhan 2023-12-8

#include <DHT.h>
#include <MQ135.h>
#include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <ThingSpeak.h>
// Air Quality Monitoring System
#define DHTPIN 2       // GPIO2 on ESP8266
#define DHTTYPE DHT11
DHT dht(DHTPIN, DHTTYPE);
MQ135 mq135(A0);
// Soil Moisture Sensor
const int soilMoisturePin = A0; // Analog pin for soil moisture sensor
// WiFi and ThingSpeak settings
const char *ssid = "xxxxxx";
const char *password = "xxxxxx";
const char *thingSpeakApiKey = "WL790UNYFNUNVMV2";
const unsigned long airQualityChannel = 2365781;
WiFiClient client;
void setup() {
Serial.begin(115200);
delay(10);
// Connect to WiFi
Serial.println("Connecting to WiFi");
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
    delay(1000);
    Serial.print(".");
    }
    Serial.println("");
    Serial.println("WiFi connected");
    ThingSpeak.begin(client);
    }
    
    void loop() {
    // Air Quality Monitoring
    float humidity = dht.readHumidity();
    float temperature = dht.readTemperature();
    float airQuality = mq135.getPPM();
    // Soil Moisture Reading
    int soilMoisture = analogRead(soilMoisturePin);
    
    Serial.print("Temperature: ");
    Serial.print(temperature);
    Serial.print(" °C\t");
    Serial.print("Humidity: ");
    Serial.print(humidity);
    Serial.print(" %\t");
    Serial.print("Air Quality: ");
    Serial.print(airQuality);
    Serial.print(" ppm\t");
    Serial.print("Soil Moisture: ");
    Serial.print(soilMoisture);
    Serial.println(" (0-1023)");
    updateAirQuality(temperature, humidity, airQuality, soilMoisture);
    delay(15000); 
    }
    
    void updateAirQuality(float temperature, float humidity, float airQuality, int soilMoisture) {
    ThingSpeak.writeField(airQualityChannel, 1, temperature, thingSpeakApiKey);
    ThingSpeak.writeField(airQualityChannel, 2, humidity, thingSpeakApiKey);
    ThingSpeak.writeField(airQualityChannel, 3, airQuality, thingSpeakApiKey);
    ThingSpeak.writeField(airQualityChannel, 4, soilMoisture, thingSpeakApiKey);
    int writeSuccess = ThingSpeak.writeFields(airQualityChannel, thingSpeakApiKey);
    if (writeSuccess) {
        Serial.println("ThingSpeak update successful");
        } else {
            Serial.println("Error updating ThingSpeak");
            }
        }

this is my code i can't see the data is updating but in serial monitor i can see the total 4 fields updating in thingspeak i can only see the field 1 is updating and remaining 3 or updated only once and not again so please help me in this please

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

Christopher Stapels 2023-12-4

You are using the single write function, you should use the multiple fields write syntax.

In your code, you are writing four seperate times(one field each) to ThingSpeak with no delay. Requests must be at least 1 second or 15 seconds apart depending on your license type.

Fortunately since you are already using the ThingSpeak library, its an easy fix. Look at the write multiple fields examples that come with the library.

The pattern is to use the SetField function for each field, and then one copy of the writeFields() function. Then you will be able to write all four fields in a single request, and then there will be a nice 15 second delay(which you already have) between each request.

12 个评论
显示 10更早的评论隐藏 10更早的评论

Rishivardhan 2023-12-6

编辑：Christopher Stapels 2023-12-6

在 MATLAB Online 中打开

Tq for your responce. After modifying the code i got result TQ very much

#include <DHT.h>
#include <MQ135.h>
#include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <ThingSpeak.h>
// Air Quality Monitoring System
#define DHTPIN 2       // GPIO2 on ESP8266
#define DHTTYPE DHT11
DHT dht(DHTPIN, DHTTYPE);
MQ135 mq135(A0);
// Soil Moisture Sensor
const int soilMoisturePin = A0; // Analog pin for soil moisture sensor
// WiFi and ThingSpeak settings
const char *ssid = "xxxxxxx";
const char *password = "xxxxxxxxxx";
const char *thingSpeakApiKey = "xxxxxxxxxxxxxxxx";
const unsigned long airQualityChannel = 2364734;
WiFiClient client;
void setup() {
Serial.begin(115200);
delay(10);
// Connect to WiFi
Serial.println("Connecting to WiFi");
WiFi.begin(ssid, password);
while (WiFi.status() != WL_CONNECTED) {
    delay(1000);
    Serial.print(".");
    }
    Serial.println("");
    Serial.println("WiFi connected");
    ThingSpeak.begin(client);
    }
    
    void loop() {
    // Air Quality Monitoring
    float humidity = dht.readHumidity();
    float temperature = dht.readTemperature();
    float airQuality = mq135.getPPM();
    // Soil Moisture Reading
    int soilMoisture = analogRead(soilMoisturePin);
    
    Serial.print("Temperature: ");
    Serial.print(temperature);
    Serial.print(" °C\t");
    Serial.print("Humidity: ");
    Serial.print(humidity);
    Serial.print(" %\t");
    Serial.print("Air Quality: ");
    Serial.print(airQuality);
    Serial.print(" ppm\t");
    Serial.print("Soil Moisture: ");
    Serial.print(soilMoisture);
    Serial.println(" (0-1023)");
    updateAirQuality(temperature, humidity, airQuality, soilMoisture);
    delay(25000); // Delay for 25 seconds between measurements
        }
        
        void updateAirQuality(float temperature, float humidity, float airQuality, int soilMoisture) {
        // Set each field value
        ThingSpeak.setField(1, temperature);
        ThingSpeak.setField(2, humidity);
        ThingSpeak.setField(3, airQuality);
        ThingSpeak.setField(4, soilMoisture);
        
        // Write all fields in a single request
        int writeSuccess = ThingSpeak.writeFields(airQualityChannel, thingSpeakApiKey);
        
        if (writeSuccess) {
            Serial.println("ThingSpeak update successful");
            } else {
                Serial.println("Error updating ThingSpeak");
                }
            }

here is my code if it is possible can you tell me should i do any changes in this or in my project i am doing this for my school event

in this project i have combained the air quality monitoring system and plant health monitroing system by that i can know the air quality and according to the air quality we can take some precautions for it.

Once again thankyou for your suggestion.

Christopher Stapels 2023-12-7

the pins on the ESP8266 cannot supply enough curent for a DC motor.

Rishivardhan 2023-12-8

ok sir

请先登录，再进行评论。

i can't see the data updating in thingspeak but only 1 field can be update in thingspeak and other 3 or not updationg only once it has been update 4 fields. In serialmonitor s

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

12 个评论
显示 10更早的评论隐藏 10更早的评论

更多回答（0 个）

社区

另请参阅

类别

标签

Community Treasure Hunt

i can't see the data updating in thingspeak but only 1 field can be update in thingspeak and other 3 or not updationg only once it has been update 4 fields. In serialmonitor s

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

采纳的回答

12 个评论 显示 10更早的评论隐藏 10更早的评论

更多回答（0 个）

社区

另请参阅

类别

标签

Community Treasure Hunt

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

12 个评论
显示 10更早的评论隐藏 10更早的评论