want to create phased array antenna as shown in picture

1 次查看（过去 30 天）
Mani
Mani 2023-12-15
评论： Mani 2023-12-18
I want to create phased array Txantenna as shown in picture and using this antenna will model radar transmision using phased.Radiator.
kindly help me ,how this antenna can be created using phased array tool box.
  1 个评论
Mani
Mani 2023-12-15
TX2
TX1 1 TX3
where, 1 is used to just represent centre point
horizonatal distance between TX1 antenna and 1 is lambda
horizonatal distance between 1 and TX3 antenna is lambda
horizonatal distanc 1 and TX2 antenna is lambda/2

请先登录，再进行评论。

请先登录，再回答此问题。

回答（1 个）

George
George 2023-12-18
You can use a phased.ConformalArray to represent an array with arbitrary element positioning - https://www.mathworks.com/help/phased/ref/phased.conformalarray-system-object.html
Assuming we are looking down on the x-y plane, with 1 being the origin, and the y axes pointing up, you could do something like this:
lambda = 1; % set this to your desired lambda
pos1 = [-lambda;0;0];
pos2 = [0;lambda/2;0];
pos3 = [lambda;0;0];
array = phased.ConformalArray('ElementPosition',[pos1,pos2,pos3]);
Assuming the antenna elements that you wish to model are isotropic, that is all you need to do, otherwise you need to be careful that the array normal is set correctly.

类别

在 Help Center 和 File Exchange 中查找有关 Antennas, Microphones, and Sonar Transducers 的更多信息

标签

产品


版本

R2020a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by