Up Conversion and Down Conversion in Phased Array Toolbox

2024 1 23
1 个回答
回答已采纳
更新时间：2024 1 29
9 次查看（30 天）

0 个投票

I would like to know if I need to Up convert my signal from Baseband to Operating frequency or just need to input my Baseband Signal to phased.array radiator object??? if I upconvert my signal and then down convert the output signal. Then it gives me wrong results of Doppler shift.

请先登录，再回答此问题。

 采纳的回答

George
George 2024-1-24

0 个投票

Hi Waseem, you just need to input your baseband signal to the radiator object.
If you look at the phased.Radiator object, you will notice an 'OperatingFrequency' property. The underlying assumption of the phased.Radiator object is that your signal data is the baseband signal which modulates a carrier frequency.

4 个评论
显示 2更早的评论 隐藏 2更早的评论

Waseem
Waseem 2024-1-24
Is there any way through which we can input upcoonverted signal as input to the radiator?
George
George 2024-1-24
Hi Waseem, it might be helpful to see your upconversion code to see exactly what you mean by upconverted signal.
There's a couple of ways that I can think of to intepret this, it would be helpful to know exactly what you are doing to the baseband signal to represent upconversion:
  • Is the upconversion that you are representing a mixing of your baseband signal with a pure sinosoid or with some other signal?
  • Are you resampling the upconverted signal at a higher rate that is high enough to capture the frequency of the carrier? Or are you still sampling the upconvereted signal at the baseband sampling frequency but applying some effects that the upconverter might have on the baseband signal?
Waseem
Waseem 2024-1-25
编辑：Waseem 2024-1-25
I am mixing the complex Baseband Signal with carrier signal using IQ modulation in first stage and then mixing with another carrier signal using only cos and then filtering out the image. Then this signal is fed to radiator. I am also upsampling the signal to match the carrier signal sampling frequency.
%%
close all; clear; clc;
PW = 3.33e-6;
PRF = 30e3;
BW = 30e6;
fs_BB = 90e6;
waveform = phased.LinearFMWaveform('SampleRate',fs_BB,'PulseWidth',PW,'PRF',PRF,'SweepBandwidth', BW,'SweepDirection','Up',...
'Envelope','Rectangular','OutputFormat','Pulses','NumPulses',1);
Baseband = waveform();
N = size(Baseband,1);
%%
up_freq = 395e6;
fs = 1.17e9; % Sample rate
x_up_sampled = interp(Baseband, 13);
N_1 = size(x_up_sampled,1);
sinewave = dsp.SineWave('Frequency',up_freq,'SampleRate',fs,'SamplesPerFrame',N_1);
coswave = dsp.SineWave('Frequency',up_freq,'SampleRate',fs, 'PhaseOffset', pi/2 , 'SamplesPerFrame',N_1);
xCos = coswave();
xSin = sinewave();
x_up = xCos .* real(x_up_sampled) + xSin .* imag(x_up_sampled);
%%
up_freq_2 = 9.62e9;
fs_2 = 32.76e9;
x_up_sampled_2 = interp(x_up, 28);
N_2 = size(x_up_sampled_2,1);
coswave = dsp.SineWave('Frequency',up_freq_2,'SampleRate',fs_2, 'PhaseOffset', pi/2 , 'SamplesPerFrame',N_2);
xCos = coswave();
xUp2 = xCos .* x_up_sampled_2;
[sig,d] = bandpass(xUp2, [9.985 10.015]*1e9, fs_2, 'StopbandAttenuation', 120);
George
George 2024-1-29
Hi Waseem - thanks for providing this information, now I understand what you are doing.
It seems that the phased.Radiator does not provide any support for propagating unmodulated signals. Therefore, I think that the phased.Radiator will only work with your baseband signal, with the OperatingFrequency property set to the final carrier frequency of the transmitted signal.

请先登录，再进行评论。

更多回答（0 个）

类别

在 帮助中心 和 File Exchange 中查找有关 Signal Radiation, Collection, and Reflection 的更多信息

产品

版本

R2021a

标签

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by