- Run the check to detect geometry issues on the scene (Tools -> Geometry Isses Settings). This could give you an idea at which positions in the scene something is not modelled well.
- Use the Road Plan tool and check if you have explicit or automatic road curves. If they are explicit try to switcht to automatic.
- You mentioned that importing of OpenDrive did not throw errors. What's about warnings? If there are still warnings this could also give you an hint where to adjust the modelling.
- Which RoadRunner version are you using? If possible switch to the latest release.
ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.41147)
2 次查看(过去 30 天)
显示 更早的评论
Hello
I am trying to import an OpenDRIVE (.xodr) file into Roadrunner and it is currently importing without any error.
Also I can able to build the scene. But after that when I try to export as a carla FILMBOX, I am getting the error as follows:
> ERROR: On line: 246 file: /local/home/batserve/jenkins/workspace/ease_GHE_Release_R2023b_Update_6/External/G1fitting/G1fitting-changeseta338d59/clothoid/Clothoid.cc
In FresnelCS f not converged to eps, x = nan oldterm = 1 absterm = nan
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.0231717)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.272595)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.207884)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.222234)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.342208)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.167842)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.326068)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.32607)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.41147)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.740939)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.836043)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.242493)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.344765)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.173278)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.740939)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.32607)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.0231705)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.109571)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.192422)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.367313)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.0231717)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.272595)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.272595)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.102054)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.167842)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.878102)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.367313)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.119811)
> ERROR: INTERNAL FAILURE: Reported geometry length differs by more than 1 percent of evaluated length (0.0114524)
What may be the solution?
3 个评论
Simone
2024-2-1
Hi,
You could make the scene smaller to find out which elements are causing the error and then check how the roads are modelled in this region.
It would be useful if you could share the OpenDrive file with us so that we can reproduce the error and debug it. I would recommend to contact our Technical Support Team.
Regards,
Simone
回答(0 个)
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Export Scenes 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!