Fill the graph with legend

4 次查看（过去 30 天）
Minhee
Minhee 2024-2-6
编辑： Harald 2024-2-6
I would like to fill the interval of lines with color like below graph.
How can I legend the graph?
num_simulations = 1000;
%Common parameters
Discount_Rate_min = 0.06; % assume 6-8%
Discount_Rate_max = 0.08;
Discount_Rate_values = unifrnd(Discount_Rate_min, Discount_Rate_max, [num_simulations, 1]);
Lifetime = 20; % years
% Define electricity costs
FLH_DE = [0,100,200,300,400,500,600,700,800,900,1000,1500,2000,2500,3000,3500,4000,4500,5000,5500,6000];
FLH_FI = [0,100,200,300,400,500,600,700,800,900,1000,1500,2000,2500,3000,3500,4000,4500,5000,5500,6000,6500,7000];
FLH_SE = [0,100,200,300,400,500,600,700,800,900,1000,1500,2000,2500,3000,3500,4000,4500,5000,5500,6000];
FLH_NO = [0,100,200,300,400,500,600,700,800,900,1000,1500,2000,2500,3000,3500,4000,4500,5000,5500,6000,6500,7000,7500,8000,8500,8760];
%electricity_cost_DE_LU = [-0.019,-0.001,0.001,0.006,0.011,0.018,0.024,0.03,0.035,0.04,0.044,0.061,0.075,0.087,0.099,0.11,0.12,0.129,0.138,0.147,0.157,0.167,0.178,0.191,0.206,0.223,0.235];
%electricity_cost_FI = [-0.002,0,0.001,0.002,0.004,0.005,0.006,0.007,0.008,0.008,0.009,0.013,0.018,0.025,0.032,0.04,0.048,0.056,0.064,0.073,0.082,0.091,0.101,0.112,0.125,0.141,0.154];
%electricity_cost_SE = [-0.002,0,0.001,0.001,0.002,0.003,0.003,0.004,0.005,0.006,0.007,0.01,0.013,0.017,0.021,0.026,0.031,0.036,0.04,0.046,0.051,0.057,0.063,0.07,0.079,0.091,0.101];
%electricity_cost_NO = [0,0.005,0.012,0.018,0.023,0.027,0.031,0.035,0.039,0.043,0.046,0.057,0.065,0.071,0.077,0.082,0.086,0.091,0.095,0.098,0.102,0.106,0.111,0.118,0.126,0.138,0.146];
electricity_cost_DE_LU_H = [0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.067,0.075,0.083,0.091,0.1,0.108];
electricity_cost_FI_H = [0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.055,0.054,0.055,0.058,0.062,0.067,0.073,0.079,0.086];
electricity_cost_SE_H = [0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.055,0.053,0.052,0.052,0.053,0.055];
electricity_cost_NO_H = [0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.063,0.067,0.07,0.074,0.077,0.081,0.085,0.089,0.095,0.101,0.11,0.116];
electricity_cost_DE_LU_L = [0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.054,0.056,0.06,0.066,0.072,0.079];
electricity_cost_FI_L = [0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.051,0.045,0.042,0.041,0.042,0.045,0.048,0.053,0.057];
electricity_cost_SE_L = [0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.052,0.047,0.043,0.041,0.04,0.041];
electricity_cost_NO_L = [0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.055,0.056,0.059,0.062,0.065,0.068,0.072,0.075,0.078,0.082,0.085,0.088];
%electricity_cost_DE_LU_P = [0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,-0.019,-0.001,0.001,0.006,0.011,0.018,0.024,0.03,0.035,0.04,0.044,0.061,0.075,0.087];
%electricity_cost_FI_P = [0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,-0.002,0,0.001,0.002,0.004,0.005,0.006,0.007,0.008,0.008,0.009,0.013,0.018,0.025];
%electricity_cost_SE_P = [0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,-0.002,0,0.001,0.001,0.002,0.003,0.003,0.004,0.005,0.006,0.007,0.01,0.013,0.017];
%electricity_cost_NO_P = [0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0,0.005,0.012,0.018,0.023,0.027,0.031,0.035,0.039,0.043,0.046,0.057,0.065,0.071];
% Create a table
%dataTable_DE_LU = table(FLH', electricity_cost_DE_LU', 'VariableNames', {'FLH', 'electricity_cost_DE_LU'});
%dataTable_FI = table(FLH', electricity_cost_FI', 'VariableNames', {'FLH', 'electricity_cost_FI'});
%dataTable_SE = table(FLH', electricity_cost_SE', 'VariableNames', {'FLH', 'electricity_cost_SE'});
%dataTable_NO = table(FLH', electricity_cost_NO', 'VariableNames', {'FLH', 'electricity_cost_NO'});
dataTable_DE_LU_H = table(FLH_DE', electricity_cost_DE_LU_H', 'VariableNames', {'FLH', 'electricity_cost_DE_LU_H'});
dataTable_FI_H = table(FLH_FI', electricity_cost_FI_H', 'VariableNames', {'FLH', 'electricity_cost_FI_H'});
dataTable_SE_H = table(FLH_SE', electricity_cost_SE_H', 'VariableNames', {'FLH', 'electricity_cost_SE_H'});
dataTable_NO_H = table(FLH_NO', electricity_cost_NO_H', 'VariableNames', {'FLH', 'electricity_cost_NO_H'});
dataTable_DE_LU_L = table(FLH_DE', electricity_cost_DE_LU_L', 'VariableNames', {'FLH', 'electricity_cost_DE_LU_L'});
dataTable_FI_L = table(FLH_FI', electricity_cost_FI_L', 'VariableNames', {'FLH', 'electricity_cost_FI_L'});
dataTable_SE_L = table(FLH_SE', electricity_cost_SE_L', 'VariableNames', {'FLH', 'electricity_cost_SE_L'});
dataTable_NO_L = table(FLH_NO', electricity_cost_NO_L', 'VariableNames', {'FLH', 'electricity_cost_NO_L'});
%dataTable_DE_LU_P = table(FLH', electricity_cost_DE_LU_P', 'VariableNames', {'FLH', 'electricity_cost_DE_LU_P'});
%dataTable_FI_P = table(FLH', electricity_cost_FI_P', 'VariableNames', {'FLH', 'electricity_cost_FI_P'});
%dataTable_SE_P = table(FLH', electricity_cost_SE_P', 'VariableNames', {'FLH', 'electricity_cost_SE_P'});
%dataTable_NO_P = table(FLH', electricity_cost_NO_P', 'VariableNames', {'FLH', 'electricity_cost_NO_P'});
LHV = 33.33; %kWh/kgH2
%AEC parameters
CAPEX_System_AEC_mean = 950; % $/kW
CAPEX_System_AEC_std = 387.3;
CAPEX_System_AEC_values = normrnd(CAPEX_System_AEC_mean, CAPEX_System_AEC_std, [num_simulations,1]);
CAPEX_System_AEC_values(CAPEX_System_AEC_values < 500) = 500;
CAPEX_System_AEC_values(CAPEX_System_AEC_values > 1400) = 1400;
%CAPEX_Stack_AEC_values = 0.35*CAPEX_System_AEC_values; % 35% of CAPEX system
CAPEX_AEC_values = CAPEX_System_AEC_values;
OPEX_AEC_values = 3;
System_Efficiency_AEC_mean = 0.665;
System_Efficiency_AEC_std = 0.0271;
System_Efficiency_AEC_values = normrnd(System_Efficiency_AEC_mean, System_Efficiency_AEC_std, [num_simulations,1]);
System_Efficiency_AEC_values(System_Efficiency_AEC_values < 0.63) = 0.63;
System_Efficiency_AEC_values(System_Efficiency_AEC_values > 0.7) = 0.7;
% Calculate AEC LCOH values
term1_S = LHV ./ (System_Efficiency_AEC_values);
term2_S = Discount_Rate_values .* (1 + Discount_Rate_values).^Lifetime;
term3_S = (OPEX_AEC_values / 100);
term4_DE = CAPEX_AEC_values ./ FLH_DE;
term4_FI = CAPEX_AEC_values ./ FLH_FI;
term4_SE = CAPEX_AEC_values ./ FLH_SE;
term4_NO = CAPEX_AEC_values ./ FLH_NO;
%DE_LU = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + electricity_cost_DE_LU);
%FI = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + electricity_cost_FI);
%SE = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + electricity_cost_SE);
%NO = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + electricity_cost_NO);
DE_LU_H = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_DE + electricity_cost_DE_LU_H);
FI_H = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_FI + electricity_cost_FI_H);
SE_H = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_SE + electricity_cost_SE_H);
NO_H = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_NO + electricity_cost_NO_H);
DE_LU_L = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_DE + electricity_cost_DE_LU_L);
FI_L = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_FI + electricity_cost_FI_L);
SE_L = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_SE + electricity_cost_SE_L);
NO_L = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_NO + electricity_cost_NO_L);
%DE_LU_P = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + electricity_cost_DE_LU_P);
%FI_P = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + electricity_cost_FI_P);
%SE_P = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + electricity_cost_SE_P);
%NO_P = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + electricity_cost_NO_P);
%avg_DE_LU = mean(DE_LU);
%avg_FI = mean(FI);
%avg_SE = mean(SE);
%avg_NO = mean(NO);
avg_DE_LU_H = mean(DE_LU_H);
avg_FI_H = mean(FI_H);
avg_SE_H = mean(SE_H);
avg_NO_H = mean(NO_H);
avg_DE_LU_L = mean(DE_LU_L);
avg_FI_L = mean(FI_L);
avg_SE_L = mean(SE_L);
avg_NO_L = mean(NO_L);
%avg_DE_LU_P = mean(DE_LU_P);
%avg_FI_P = mean(FI_P);
%avg_SE_P = mean(SE_P);
%avg_NO_P = mean(NO_P);
% Plotting LCOH for each country based on FLH
figure;
hold on;
%plot(FLH, avg_DE_LU, 'DisplayName', 'DE', 'LineWidth', 2, 'Color', [0.2,0.5,0.2]);
%plot(FLH, avg_FI, 'DisplayName', 'FI', 'LineWidth', 2, 'Color', 'm');
%plot(FLH, avg_SE, 'DisplayName', 'SE', 'LineWidth', 2, 'Color', 'b');
%plot(FLH, avg_NO, 'DisplayName', 'NO', 'LineWidth', 2, 'Color', 'r');
plot(FLH_DE, avg_DE_LU_H, '-', 'DisplayName', 'DE', 'LineWidth', 2, 'Color', [0.2,0.5,0.2]);
plot(FLH_FI, avg_FI_H, '-', 'DisplayName', 'FI', 'LineWidth', 2, 'Color', 'm');
plot(FLH_SE, avg_SE_H, '-', 'DisplayName', 'SE', 'LineWidth', 2, 'Color', 'b');
plot(FLH_NO, avg_NO_H, '-', 'DisplayName', 'NO', 'LineWidth', 2, 'Color', 'r');
plot(FLH_DE, avg_DE_LU_L, '--', 'DisplayName', 'DE', 'LineWidth', 2, 'Color', [0.2,0.5,0.2]);
plot(FLH_FI, avg_FI_L, '--', 'DisplayName', 'FI', 'LineWidth', 2, 'Color', 'm');
plot(FLH_SE, avg_SE_L, '--', 'DisplayName', 'SE', 'LineWidth', 2, 'Color', 'b');
plot(FLH_NO, avg_NO_L, '--', 'DisplayName', 'NO', 'LineWidth', 2, 'Color', 'r');
%plot(FLH, avg_DE_LU_P, ':', 'DisplayName', 'DE_P', 'LineWidth', 2, 'Color', [0.2,0.5,0.2]);
%plot(FLH, avg_FI_P, ':', 'DisplayName', 'FI_P', 'LineWidth', 2, 'Color', 'm');
%plot(FLH, avg_SE_P, ':', 'DisplayName', 'SE_P', 'LineWidth', 2, 'Color', 'b');
%plot(FLH, avg_NO_P, ':', 'DisplayName', 'NO_P', 'LineWidth', 2, 'Color', 'r');
hold off;
% Set axis labels and legend
xlabel('FLH');
ylabel('LCOH');
title('LCOH of Each Country');
legend('Location', 'Best');
grid on;
ylim([0 12]);

请先登录，再回答此问题。

回答（3 个）

Harald
Harald 2024-2-6
Hi,
one way of doing this is patch with a "round trip". I have removed the first entries since they are Inf.
FLH_NO_short = FLH_NO(2:end);
avg_NO_L_short = avg_NO_L(2:end);
avg_NO_H_short = avg_NO_H(2:end);
patch([FLH_NO_short, fliplr(FLH_NO_short), FLH_NO_short(1)], ...
[avg_NO_H_short, fliplr(avg_NO_L_short), avg_NO_H_short(1)],...
"r", "FaceAlpha", 0.5, "EdgeColor", "none")
For more ideas on how to resolve this, see related threads, e.g.
https://www.mathworks.com/matlabcentral/answers/180829-shade-area-between-graphs
Best wishes,
Harald
  2 个评论
Minhee
Minhee 2024-2-6
How can I fill other parts?
Can you let me know the full code for DE, FI, SE?
Harald
Harald 2024-2-6
编辑：Harald 2024-2-6
It's really just a matter of copy-pasting. Even better, you could use a function (and actually put the calculations in there as well to avoid all the code duplication):
function p = plotFilledCurves(x, y_lower, y_upper, color, name)
% It seems that the first and only the first value is always inf, thus
% remove it
x = x(2:end);
y_lower = y_lower(2:end);
y_upper = y_upper(2:end);
p(1) = plot(x, y_lower, '-', "DisplayName", name, "Color", color);
p(2) = plot(x, y_upper, '--', "DisplayName", name, "Color", color);
p(3) = patch([x, fliplr(x)], [y_lower, fliplr(y_upper)], ...
color, "FaceAlpha", 0.5, "EdgeColor", "none");
end
Then, you could use the following calls to this function:
p(1:3) = plotFilledCurves(FLH_DE, avg_DE_LU_L, avg_DE_LU_H, [0.2,0.5,0.2], "DE");
p(4:6) = plotFilledCurves(FLH_FI, avg_FI_L, avg_FI_H, "m", "FI");
p(7:9) = plotFilledCurves(FLH_NO, avg_NO_L, avg_NO_H, "r", "NO");
p(10:12) = plotFilledCurves(FLH_SE, avg_SE_L, avg_SE_H, "b", "SE");
Personally, I would prefer to show only one legend per country:
legend(p(1:3:end), 'Location', 'Best');
Best wishes,
Harald

请先登录，再进行评论。

Mathieu NOE
Mathieu NOE 2024-2-6
Ran in:
hello
patch or fill can be used for the job
here an example with fill
% dummy data
x = 0:50;
y = exp(-x/10) ;
inter = 1;
% create the interval
X=[x,fliplr(x)];
Y=[y+inter/2,fliplr(y-inter/2)];
figure(1)
f = fill(X,Y,'r','LineStyle','none'); %#plot filled area
f.FaceAlpha = 0.2; % define transparency
hold on
plot(x,y,'r','linewidth',2)
Voss
Voss 2024-2-6
Ran in:
num_simulations = 1000;
%Common parameters
Discount_Rate_min = 0.06; % assume 6-8%
Discount_Rate_max = 0.08;
Discount_Rate_values = unifrnd(Discount_Rate_min, Discount_Rate_max, [num_simulations, 1]);
Lifetime = 20; % years
% Define electricity costs
FLH_DE = [0,100,200,300,400,500,600,700,800,900,1000,1500,2000,2500,3000,3500,4000,4500,5000,5500,6000];
FLH_FI = [0,100,200,300,400,500,600,700,800,900,1000,1500,2000,2500,3000,3500,4000,4500,5000,5500,6000,6500,7000];
FLH_SE = [0,100,200,300,400,500,600,700,800,900,1000,1500,2000,2500,3000,3500,4000,4500,5000,5500,6000];
FLH_NO = [0,100,200,300,400,500,600,700,800,900,1000,1500,2000,2500,3000,3500,4000,4500,5000,5500,6000,6500,7000,7500,8000,8500,8760];
%electricity_cost_DE_LU = [-0.019,-0.001,0.001,0.006,0.011,0.018,0.024,0.03,0.035,0.04,0.044,0.061,0.075,0.087,0.099,0.11,0.12,0.129,0.138,0.147,0.157,0.167,0.178,0.191,0.206,0.223,0.235];
%electricity_cost_FI = [-0.002,0,0.001,0.002,0.004,0.005,0.006,0.007,0.008,0.008,0.009,0.013,0.018,0.025,0.032,0.04,0.048,0.056,0.064,0.073,0.082,0.091,0.101,0.112,0.125,0.141,0.154];
%electricity_cost_SE = [-0.002,0,0.001,0.001,0.002,0.003,0.003,0.004,0.005,0.006,0.007,0.01,0.013,0.017,0.021,0.026,0.031,0.036,0.04,0.046,0.051,0.057,0.063,0.07,0.079,0.091,0.101];
%electricity_cost_NO = [0,0.005,0.012,0.018,0.023,0.027,0.031,0.035,0.039,0.043,0.046,0.057,0.065,0.071,0.077,0.082,0.086,0.091,0.095,0.098,0.102,0.106,0.111,0.118,0.126,0.138,0.146];
electricity_cost_DE_LU_H = [0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.067,0.075,0.083,0.091,0.1,0.108];
electricity_cost_FI_H = [0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.055,0.054,0.055,0.058,0.062,0.067,0.073,0.079,0.086];
electricity_cost_SE_H = [0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.055,0.053,0.052,0.052,0.053,0.055];
electricity_cost_NO_H = [0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.063,0.067,0.07,0.074,0.077,0.081,0.085,0.089,0.095,0.101,0.11,0.116];
electricity_cost_DE_LU_L = [0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.054,0.056,0.06,0.066,0.072,0.079];
electricity_cost_FI_L = [0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.051,0.045,0.042,0.041,0.042,0.045,0.048,0.053,0.057];
electricity_cost_SE_L = [0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.052,0.047,0.043,0.041,0.04,0.041];
electricity_cost_NO_L = [0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.06,0.055,0.056,0.059,0.062,0.065,0.068,0.072,0.075,0.078,0.082,0.085,0.088];
%electricity_cost_DE_LU_P = [0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,-0.019,-0.001,0.001,0.006,0.011,0.018,0.024,0.03,0.035,0.04,0.044,0.061,0.075,0.087];
%electricity_cost_FI_P = [0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,-0.002,0,0.001,0.002,0.004,0.005,0.006,0.007,0.008,0.008,0.009,0.013,0.018,0.025];
%electricity_cost_SE_P = [0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,-0.002,0,0.001,0.001,0.002,0.003,0.003,0.004,0.005,0.006,0.007,0.01,0.013,0.017];
%electricity_cost_NO_P = [0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0.07,0,0.005,0.012,0.018,0.023,0.027,0.031,0.035,0.039,0.043,0.046,0.057,0.065,0.071];
% Create a table
%dataTable_DE_LU = table(FLH', electricity_cost_DE_LU', 'VariableNames', {'FLH', 'electricity_cost_DE_LU'});
%dataTable_FI = table(FLH', electricity_cost_FI', 'VariableNames', {'FLH', 'electricity_cost_FI'});
%dataTable_SE = table(FLH', electricity_cost_SE', 'VariableNames', {'FLH', 'electricity_cost_SE'});
%dataTable_NO = table(FLH', electricity_cost_NO', 'VariableNames', {'FLH', 'electricity_cost_NO'});
dataTable_DE_LU_H = table(FLH_DE', electricity_cost_DE_LU_H', 'VariableNames', {'FLH', 'electricity_cost_DE_LU_H'});
dataTable_FI_H = table(FLH_FI', electricity_cost_FI_H', 'VariableNames', {'FLH', 'electricity_cost_FI_H'});
dataTable_SE_H = table(FLH_SE', electricity_cost_SE_H', 'VariableNames', {'FLH', 'electricity_cost_SE_H'});
dataTable_NO_H = table(FLH_NO', electricity_cost_NO_H', 'VariableNames', {'FLH', 'electricity_cost_NO_H'});
dataTable_DE_LU_L = table(FLH_DE', electricity_cost_DE_LU_L', 'VariableNames', {'FLH', 'electricity_cost_DE_LU_L'});
dataTable_FI_L = table(FLH_FI', electricity_cost_FI_L', 'VariableNames', {'FLH', 'electricity_cost_FI_L'});
dataTable_SE_L = table(FLH_SE', electricity_cost_SE_L', 'VariableNames', {'FLH', 'electricity_cost_SE_L'});
dataTable_NO_L = table(FLH_NO', electricity_cost_NO_L', 'VariableNames', {'FLH', 'electricity_cost_NO_L'});
%dataTable_DE_LU_P = table(FLH', electricity_cost_DE_LU_P', 'VariableNames', {'FLH', 'electricity_cost_DE_LU_P'});
%dataTable_FI_P = table(FLH', electricity_cost_FI_P', 'VariableNames', {'FLH', 'electricity_cost_FI_P'});
%dataTable_SE_P = table(FLH', electricity_cost_SE_P', 'VariableNames', {'FLH', 'electricity_cost_SE_P'});
%dataTable_NO_P = table(FLH', electricity_cost_NO_P', 'VariableNames', {'FLH', 'electricity_cost_NO_P'});
LHV = 33.33; %kWh/kgH2
%AEC parameters
CAPEX_System_AEC_mean = 950; % $/kW
CAPEX_System_AEC_std = 387.3;
CAPEX_System_AEC_values = normrnd(CAPEX_System_AEC_mean, CAPEX_System_AEC_std, [num_simulations,1]);
CAPEX_System_AEC_values(CAPEX_System_AEC_values < 500) = 500;
CAPEX_System_AEC_values(CAPEX_System_AEC_values > 1400) = 1400;
%CAPEX_Stack_AEC_values = 0.35*CAPEX_System_AEC_values; % 35% of CAPEX system
CAPEX_AEC_values = CAPEX_System_AEC_values;
OPEX_AEC_values = 3;
System_Efficiency_AEC_mean = 0.665;
System_Efficiency_AEC_std = 0.0271;
System_Efficiency_AEC_values = normrnd(System_Efficiency_AEC_mean, System_Efficiency_AEC_std, [num_simulations,1]);
System_Efficiency_AEC_values(System_Efficiency_AEC_values < 0.63) = 0.63;
System_Efficiency_AEC_values(System_Efficiency_AEC_values > 0.7) = 0.7;
% Calculate AEC LCOH values
term1_S = LHV ./ (System_Efficiency_AEC_values);
term2_S = Discount_Rate_values .* (1 + Discount_Rate_values).^Lifetime;
term3_S = (OPEX_AEC_values / 100);
term4_DE = CAPEX_AEC_values ./ FLH_DE;
term4_FI = CAPEX_AEC_values ./ FLH_FI;
term4_SE = CAPEX_AEC_values ./ FLH_SE;
term4_NO = CAPEX_AEC_values ./ FLH_NO;
%DE_LU = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + electricity_cost_DE_LU);
%FI = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + electricity_cost_FI);
%SE = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + electricity_cost_SE);
%NO = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + electricity_cost_NO);
DE_LU_H = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_DE + electricity_cost_DE_LU_H);
FI_H = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_FI + electricity_cost_FI_H);
SE_H = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_SE + electricity_cost_SE_H);
NO_H = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_NO + electricity_cost_NO_H);
DE_LU_L = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_DE + electricity_cost_DE_LU_L);
FI_L = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_FI + electricity_cost_FI_L);
SE_L = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_SE + electricity_cost_SE_L);
NO_L = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_NO + electricity_cost_NO_L);
%DE_LU_P = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + electricity_cost_DE_LU_P);
%FI_P = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + electricity_cost_FI_P);
%SE_P = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + electricity_cost_SE_P);
%NO_P = term1_S .* ((term2_S ./ ((1 + Discount_Rate_values).^Lifetime - 1) + term3_S) .* term4_S + electricity_cost_NO_P);
%avg_DE_LU = mean(DE_LU);
%avg_FI = mean(FI);
%avg_SE = mean(SE);
%avg_NO = mean(NO);
avg_DE_LU_H = mean(DE_LU_H);
avg_FI_H = mean(FI_H);
avg_SE_H = mean(SE_H);
avg_NO_H = mean(NO_H);
avg_DE_LU_L = mean(DE_LU_L);
avg_FI_L = mean(FI_L);
avg_SE_L = mean(SE_L);
avg_NO_L = mean(NO_L);
%avg_DE_LU_P = mean(DE_LU_P);
%avg_FI_P = mean(FI_P);
%avg_SE_P = mean(SE_P);
%avg_NO_P = mean(NO_P);
% Plotting LCOH for each country based on FLH
figure;
hold on;
%plot(FLH, avg_DE_LU, 'DisplayName', 'DE', 'LineWidth', 2, 'Color', [0.2,0.5,0.2]);
%plot(FLH, avg_FI, 'DisplayName', 'FI', 'LineWidth', 2, 'Color', 'm');
%plot(FLH, avg_SE, 'DisplayName', 'SE', 'LineWidth', 2, 'Color', 'b');
%plot(FLH, avg_NO, 'DisplayName', 'NO', 'LineWidth', 2, 'Color', 'r');
plot(FLH_DE, avg_DE_LU_H, '-', 'DisplayName', 'DE', 'LineWidth', 2, 'Color', [0.2,0.5,0.2]);
plot(FLH_FI, avg_FI_H, '-', 'DisplayName', 'FI', 'LineWidth', 2, 'Color', 'm');
plot(FLH_SE, avg_SE_H, '-', 'DisplayName', 'SE', 'LineWidth', 2, 'Color', 'b');
plot(FLH_NO, avg_NO_H, '-', 'DisplayName', 'NO', 'LineWidth', 2, 'Color', 'r');
plot(FLH_DE, avg_DE_LU_L, '--', 'DisplayName', 'DE', 'LineWidth', 2, 'Color', [0.2,0.5,0.2]);
plot(FLH_FI, avg_FI_L, '--', 'DisplayName', 'FI', 'LineWidth', 2, 'Color', 'm');
plot(FLH_SE, avg_SE_L, '--', 'DisplayName', 'SE', 'LineWidth', 2, 'Color', 'b');
plot(FLH_NO, avg_NO_L, '--', 'DisplayName', 'NO', 'LineWidth', 2, 'Color', 'r');
%plot(FLH, avg_DE_LU_P, ':', 'DisplayName', 'DE_P', 'LineWidth', 2, 'Color', [0.2,0.5,0.2]);
%plot(FLH, avg_FI_P, ':', 'DisplayName', 'FI_P', 'LineWidth', 2, 'Color', 'm');
%plot(FLH, avg_SE_P, ':', 'DisplayName', 'SE_P', 'LineWidth', 2, 'Color', 'b');
%plot(FLH, avg_NO_P, ':', 'DisplayName', 'NO_P', 'LineWidth', 2, 'Color', 'r');
hold off;
% Set axis labels and legend
xlabel('FLH');
ylabel('LCOH');
title('LCOH of Each Country');
legend('Location', 'Best');
grid on;
ylim([0 12]);
% create patches to fill the areas
fidx = isfinite(avg_DE_LU_H) & isfinite(avg_DE_LU_L);
patch( ...
[FLH_DE(fidx) flip(FLH_DE(fidx))], ...
[avg_DE_LU_H(fidx) flip(avg_DE_LU_L(fidx))], ...
[0.2,0.5,0.2], ...
'EdgeColor','none', ...
'FaceAlpha',0.5, ...
'HandleVisibility','off')
fidx = isfinite(avg_FI_H) & isfinite(avg_FI_L);
patch( ...
[FLH_FI(fidx) flip(FLH_FI(fidx))], ...
[avg_FI_H(fidx) flip(avg_FI_L(fidx))], ...
'm', ...
'EdgeColor','none', ...
'FaceAlpha',0.5, ...
'HandleVisibility','off')
fidx = isfinite(avg_SE_H) & isfinite(avg_SE_L);
patch( ...
[FLH_SE(fidx) flip(FLH_SE(fidx))], ...
[avg_SE_H(fidx) flip(avg_SE_L(fidx))], ...
'b', ...
'EdgeColor','none', ...
'FaceAlpha',0.5, ...
'HandleVisibility','off')
fidx = isfinite(avg_NO_H) & isfinite(avg_NO_L);
patch( ...
[FLH_NO(fidx) flip(FLH_NO(fidx))], ...
[avg_NO_H(fidx) flip(avg_NO_L(fidx))], ...
'r', ...
'EdgeColor','none', ...
'FaceAlpha',0.5, ...
'HandleVisibility','off')

类别

在 Help Center 和 File Exchange 中查找有关 Subplots 的更多信息

标签

产品


版本

R2021a

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by