I am trying to program two arduinos using matlab and only one is working. I am not totally sure if it is a code issue.

Question

Cameron Leffler 2024-2-27

0
链接

此问题的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2087761-i-am-trying-to-program-two-arduinos-using-matlab-and-only-one-is-working-i-am-not-totally-sure-if-i

回答： MathWorks MATLAB Hardware Team 2024-3-14

I am very new to matlab and am working on my senior thesis (as a non CS major). I am trying to program two arduinos to turn 5 stepper motors each in parallel using matlab and I am only getting motors to turn with one arduino. I need a second pair of eyes on my code to make sure it is not a code issue and is rather an issue with the circuitry.

function [currentAbIndex] = abCode(desiredIndex)
global currentAbIndex;
global currentFlexIndex
global abMatrix;
if currentFlexIndex > 1
    flexCode(1)
end
a1 = arduino('COM4', 'Uno');
a2 = arduino('COM3', 'Uno');
pinDirA = "D12";
pinDirB = "D13";
pinDirCPosY = "D8";
pinDirCNegY = "D8";
pinDirCX = "D13";
pinDirD = "D12";
pinDirE = "D4";
pinDirFPosY = "D7";
pinDirFNegY = "D7";
pinDirFZ = "D4";
pinMovA = "D10";
pinMovB = "D11";
pinMovCPosY = "D9";
pinMovCNegY = "D9";
pinMovCX = "D11";
pinMovD = "D10";
pinMovE = "D5";
pinMovFPosY = "D6";
pinMovFNegY = "D6";
pinMovFZ = "D5";
configurePin(a2,pinDirA,'DigitalOutput')
configurePin(a2,pinDirB,'DigitalOutput')
configurePin(a2,pinDirCPosY,'DigitalOutput')
configurePin(a1,pinDirCNegY,'DigitalOutput')
configurePin(a1,pinDirCX,'DigitalOutput')
configurePin(a1,pinDirD,'DigitalOutput')
configurePin(a2,pinDirE,'DigitalOutput')
configurePin(a1,pinDirFZ,'DigitalOutput')
configurePin(a2,pinDirFPosY,'DigitalOutput')
configurePin(a1,pinDirFNegY,'DigitalOutput')
configurePin(a2,pinMovA,'PWM')
configurePin(a2,pinMovB,'PWM')
configurePin(a2,pinMovCPosY,'PWM')
configurePin(a1,pinMovCNegY,'PWM')
configurePin(a1,pinMovCX,'PWM')
configurePin(a1,pinMovD,'PWM')
configurePin(a2,pinMovE,'PWM')
configurePin(a1,pinMovFPosY,'PWM')
configurePin(a2,pinMovFNegY,'PWM')
configurePin(a1,pinMovFZ,'PWM')
directionPins1 = [pinDirFZ, pinDirCNegY, pinDirFNegY, pinDirD, pinDirCX];
directionPins2 = [pinDirA, pinDirB, pinDirCPosY, pinDirFPosY, pinDirE];
movementPins1 = [pinMovFZ, pinMovCNegY, pinMovFNegY, pinMovD, pinMovCX];
movementPins2 = [pinMovA, pinMovB, pinMovCPosY, pinMovFPosY, pinMovE];
i = 1;
if currentAbIndex < desiredIndex
    while currentAbIndex < desiredIndex
        
        while i<=5
            deltaLength = abs(abMatrix(currentAbIndex,i)-abMatrix(currentAbIndex+1,i));
            
            rotationDuration = deltaLength*116.886;
            if abMatrix(currentAbIndex+1,i) > abMatrix(currentAbIndex,i)
                writeDigitalPin(a1,directionPins1(i),1)
                writeDigitalPin(a2,directionPins2(i),1)
            else
                writeDigitalPin(a1,directionPins1(i),0)
                writeDigitalPin(a2,directionPins2(i),0)
            end
            
            writePWMDutyCycle(a1,movementPins1(i),0)
            writePWMDutyCycle(a2,movementPins2(i),0)
            minDutyCycle = 0.03;
            maxDutyCycle = 0.12;
            writePWMDutyCycle(a1,movementPins1(i),minDutyCycle)
            writePWMDutyCycle(a2,movementPins2(i),minDutyCycle)
            
            startTime = tic;
            
            while toc(startTime) < rotationDuration
                % Adjust the duty cycle gradually to simulate rotation
                currentDutyCycle = minDutyCycle + (toc(startTime) / rotationDuration)...
                    * (maxDutyCycle - minDutyCycle);
                writePWMDutyCycle(a1, movementPins1(i), currentDutyCycle);
                writePWMDutyCycle(a2, movementPins2(i), currentDutyCycle);
                
                % Add a small delay for smoother motion (adjust as needed)
                pause(0.01);
            end
            
            % Stop the servo motor by setting the duty cycle to 0
            writePWMDutyCycle(a1, movementPins1(i), 0);
            writePWMDutyCycle(a2, movementPins2(i), 0);
            i = i+1;
        end
        currentAbIndex = currentAbIndex + 1;
        i = 1;
    end
else
    while currentAbIndex > desiredIndex
        
        while i<=5
            deltaLength = abs(abMatrix(currentAbIndex,i)-abMatrix(currentAbIndex-1,i));
            
            rotationDuration = deltaLength*116.886;
            if abMatrix(currentAbIndex-1,i) > abMatrix(currentAbIndex,i)
                writeDigitalPin(a1,directionPins1(i),1)
                writeDigitalPin(a2, directionPins2(i),1)
            else
                writeDigitalPin(a1,directionPins1(i),0)
                writeDigitalPin(a2,directionPins2(i),0)
            end
            
            writePWMDutyCycle(a1,movementPins1(i),0)
            writePWMDutyCycle(a2,movementPins2(i),0)
            minDutyCycle = 0.03;
            maxDutyCycle = 0.12;
            writePWMDutyCycle(a1,movementPins1(i),minDutyCycle)
            writePWMDutyCycle(a2,movementPins2(i),minDutyCycle)
            
            startTime = tic;
            
            while toc(startTime) < rotationDuration
                % Adjust the duty cycle gradually to simulate rotation
                currentDutyCycle = minDutyCycle + (toc(startTime) / rotationDuration)...
                    * (maxDutyCycle - minDutyCycle);
                writePWMDutyCycle(a1, movementPins1(i), currentDutyCycle);
                writePWMDutyCycle(a2, movementPins2(i), currentDutyCycle);
                
                % Add a small delay for smoother motion (adjust as needed)
                pause(0.01);
            end
            
            % Stop the servo motor by setting the duty cycle to 0
            writePWMDutyCycle(a1, movementPins1(i), 0);
            writePWMDutyCycle(a2, movementPins2(i), 0);
            i = i+1;
        end
        currentAbIndex = currentAbIndex - 1;
        i = 1;
    end
end
clear a1
clear a2
end

Thank you so much to anyone who looks this over. It really helps a lot.

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

Rob Purser 2024-3-6

I don't see anything obviously wrong, but I can't claim to have looked deeply. I probably would need to see a schematic to understand how you have it wired up. That said, I'd recommend pulling out all the code for one aduino, get that working, and then repeat for the second one. Once you've got them both working independently, merge them together. That'll isolate the two and simplify your code. Also consider using an object or functions to reduce the duplicate code for arduinos 1 and 2.

Also, which Arduino? Are one and two the same model?

请先登录，再进行评论。

请先登录，再回答此问题。

Answer 1

MathWorks MATLAB Hardware Team 2024-3-14

0
链接

此回答的直接链接

https://ww2.mathworks.cn/matlabcentral/answers/2087761-i-am-trying-to-program-two-arduinos-using-matlab-and-only-one-is-working-i-am-not-totally-sure-if-i#answer_1425251

Hi,

Rob's suggested steps are a good starting point.

Additionally, you might want to explore the following methods:

1. The MATLAB Support Package for Arduino hardware does not directly support stepper motors. However, if you're using shields, the Adafruit shield API might be of interest:

https://www.mathworks.com/help/supportpkg/arduinoio/ref/arduinoioaddons.adafruit.stepper.html

2. You can also explore "Custom Arduino Libraries" approach for controlling two steppers motors at once. See the following link to know more, https://in.mathworks.com/help/supportpkg/arduinoio/custom-arduino-libraries.html

Please feel free to reach out to MathWorks Technical Support if you need any further assistance,

https://www.mathworks.com/support/contact_us.html

Thanks,

MATLAB Hardware Team

MathWorks

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

请先登录，再进行评论。

I am trying to program two arduinos using matlab and only one is working. I am not totally sure if it is a code issue.

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

回答（1 个）

0 个评论
显示 -2更早的评论隐藏 -2更早的评论

另请参阅

类别

标签

Community Treasure Hunt

I am trying to program two arduinos using matlab and only one is working. I am not totally sure if it is a code issue.

1 个评论 显示 -1更早的评论隐藏 -1更早的评论

回答（1 个）

0 个评论 显示 -2更早的评论隐藏 -2更早的评论

另请参阅

类别

标签

Community Treasure Hunt

1 个评论
显示 -1更早的评论隐藏 -1更早的评论

0 个评论
显示 -2更早的评论隐藏 -2更早的评论