How would I properly go about creating this function?
2 次查看(过去 30 天)
显示 更早的评论
I am doing a project to practice matlab and thought it would be best to be put into a function. This is my function and the rest of my code, I have variables t_values, height_values, and width_values that need to be used outside of the function, but I do not know how to use them from inside the function. These equations are going to be different for the different beams which is why I decided to create a general function. Thanks!
l = 70*12; %length
maxHeight = 12; %maximum height of beam
maxWidth = 10; %maximum width of beam
minHeight = 3; %minimum height of beam
minWidth = 3; %minimum width of beam
maxDef = 10; %maximum beam deformation
w = 3; %distributed load
p = 500; %point force
a = l/3; %distance to point force
E_alum = 9.9*10^6; %aluminum stiffness
E_steel = 28*10^6; %steel stiffness
E_ti = 16*10^6; %titanium stiffness
den_alum = .098; %aluminum density
den_steel = .286; %steel density
den_ti = .16; %titanium density
E = [E_alum, E_steel, E_ti];
density = [den_alum, den_steel, den_ti];
%For combined load
I_min = (w*(l^4)./(E.*30.*maxDef))...
- ((p*(a^2)*((3*l)-a))./(E.*6.*maxDef));
disp('I-Beam');
A_horizI = width_values.*t_values; %Area of flanges
A_vertI = t_values.*(height_values-(2.*t_values)); %Area of web
I_horizI = width_values.*t_values.^3; %Moment of flanges
I_vertI = (t_values.*(height_values-(2.*t_values)).^3)./12; %Moment of web
I_I_beam = I_vertI + 2.*(I_horizI + A_horizI.*((height_values./2)-(t_values./2)).^2); %I for I beam
weightIbeam = @(t, h, w, l, density) (2*w.*t + t.*(h-2.*t))*l*density; %Weight equation for I beam
beamoptimize(I_min, l, density,I_I_beam,weightIbeam);
function beamoptimize( I_min, l, density, I1, weightFunc)
t = 0.1:0.05:1;
height = minHeight:0.05:maxHeight;
width = minWidth:0.05:maxWidth;
V = {t, height, width};
C = cell(1, numel(V));
[C{:}] = ndgrid(V{:});
C = cellfun(@(X) reshape(X, [], 1), C, 'UniformOutput', false);
C = horzcat(C{:});
t_values = C(:, 1);
height_values = C(:, 2);
width_values = C(:, 3);
for i = 1:length(I_min)
I = I1;
valid_I = I(I >= I_min(i));
valid_t = t_values(I >= I_min(i));
valid_height = height_values(I >= I_min(i));
valid_width = width_values(I >= I_min(i));
% Calculate weight using the provided weight function
weight = weightFunc(valid_t, valid_height, valid_width, l, density(i));
[min_weight, min_index] = min(weight);
optimal_I = valid_I(min_index);
optimal_t = valid_t(min_index);
optimal_height = valid_height(min_index);
optimal_width = valid_width(min_index);
disp(['For I_min = ', num2str(I_min(i))]);
disp(['Minimum weight: ', num2str(min_weight)]);
disp(['Optimal valid_I: ', num2str(optimal_I)]);
disp(['Minimum thickness: ', num2str(optimal_t)]);
disp(['Optimal height: ', num2str(optimal_height)]);
disp(['Optimal width: ', num2str(optimal_width)]);
disp('---------------------------------------');
end
end
1 个评论
Dyuman Joshi
2024-4-20
What is the objective here? What are you trying to do?
Which values are the inputs? Which parameters are outputs? Which quantities are constants?
采纳的回答
Walter Roberson
2024-4-20
l = 70*12; %length
maxHeight = 12; %maximum height of beam
maxWidth = 10; %maximum width of beam
minHeight = 3; %minimum height of beam
minWidth = 3; %minimum width of beam
maxDef = 10; %maximum beam deformation
w = 3; %distributed load
p = 500; %point force
a = l/3; %distance to point force
E_alum = 9.9*10^6; %aluminum stiffness
E_steel = 28*10^6; %steel stiffness
E_ti = 16*10^6; %titanium stiffness
den_alum = .098; %aluminum density
den_steel = .286; %steel density
den_ti = .16; %titanium density
E = [E_alum, E_steel, E_ti];
density = [den_alum, den_steel, den_ti];
%For combined load
I_min = (w*(l^4)./(E.*30.*maxDef))...
- ((p*(a^2)*((3*l)-a))./(E.*6.*maxDef));
disp('I-Beam');
[height_values, width_values, t_values] = calculate_height_width(minHeight, maxHeight, minWidth, maxWidth);
A_horizI = width_values.*t_values; %Area of flanges
A_vertI = t_values.*(height_values-(2.*t_values)); %Area of web
I_horizI = width_values.*t_values.^3; %Moment of flanges
I_vertI = (t_values.*(height_values-(2.*t_values)).^3)./12; %Moment of web
I_I_beam = I_vertI + 2.*(I_horizI + A_horizI.*((height_values./2)-(t_values./2)).^2); %I for I beam
weightIbeam = @(t, h, w, l, density) (2*w.*t + t.*(h-2.*t))*l*density; %Weight equation for I beam
beamoptimize(height_values, width_values, t_values, I_min, l, density, I_I_beam, weightIbeam);
function [height_values, width_values, t_values] = calculate_height_width(minHeight, maxHeight, minWidth, maxWidth)
t = 0.1:0.05:1;
height = minHeight:0.05:maxHeight;
width = minWidth:0.05:maxWidth;
V = {t, height, width};
C = cell(1, numel(V));
[C{:}] = ndgrid(V{:});
C = cellfun(@(X) reshape(X, [], 1), C, 'UniformOutput', false);
C = horzcat(C{:});
t_values = C(:, 1);
height_values = C(:, 2);
width_values = C(:, 3);
end
function beamoptimize( height_values, width_values, t_values, I_min, l, density, I1, weightFunc)
for i = 1:length(I_min)
I = I1;
valid_I = I(I >= I_min(i));
valid_t = t_values(I >= I_min(i));
valid_height = height_values(I >= I_min(i));
valid_width = width_values(I >= I_min(i));
% Calculate weight using the provided weight function
weight = weightFunc(valid_t, valid_height, valid_width, l, density(i));
[min_weight, min_index] = min(weight);
optimal_I = valid_I(min_index);
optimal_t = valid_t(min_index);
optimal_height = valid_height(min_index);
optimal_width = valid_width(min_index);
disp(['For I_min = ', num2str(I_min(i))]);
disp(['Minimum weight: ', num2str(min_weight)]);
disp(['Optimal valid_I: ', num2str(optimal_I)]);
disp(['Minimum thickness: ', num2str(optimal_t)]);
disp(['Optimal height: ', num2str(optimal_height)]);
disp(['Optimal width: ', num2str(optimal_width)]);
disp('---------------------------------------');
end
end
更多回答(1 个)
Image Analyst
2024-4-20
What is "width_values"? You never set it equal to anything so of course it complains.
2 个评论
Image Analyst
2024-4-20
编辑:Image Analyst
2024-4-20
It was not set before you tried to use it. Maybe you set it later but if you use it it must be assigned first. Tell me the line of code where you actually assigned values to width_values.
另请参阅
类别
在 Help Center 和 File Exchange 中查找有关 Fixed-Point Math Functions 的更多信息
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!